官方剛寄了進度信來,看了一下原文大意 預計下週約2014年10月20日第一個iPhone 5的殼(樣品)應該就會先出來~ 假如一切按計劃進行,而 iPhone 6或 iPhone 6 Plus的(樣品)殼 預計10月底第一個產品就會出來 官方的3D示意圖: http://ppt.cc/4gKs 順便請教各位大大覺得 灰色、銀色和金色個配哪個顏色的眶比較好看?? ======================================== 原文如下(小弟英文不好,若有重要事項的話還煩請厲害的大大補充): Dear Backers, We hope that you are having a great start to you week. The past four days have been incredibly fulfilling for all of us at Evolutive Labs. We want to thank all of our backers for helping us to reach our funding goal in under four hours. For that we thank you from the bottom of our hearts. When you spend hours upon hours in the lab creating something without any feedback, it is incredibly rewarding to have received the response to the Crash Guard that you all have provided. While it only took four hours to reach our funding goal, please don’t think that is the end of the story. We are working around the clock with our manufacturing partners to live up to the delivery dates noted in our launch pitch. We want to get these bumpers in your hands as much as you want to receive them, and we will not rest until we have accomplished that goal. Over the coming weeks, we will continue to keep you informed as the progress we have made, so keep checking back for the latest updates. We hope that by the middle of next week (week of October 20, 2014) we will have our first production samples complete for the iPhone 5 and we will be able to use those as samples to show off the color assortment for both the iPhone 5, as well as the iPhone 6 and 6 Plus. Assuming that everything goes according to plan, we should have the first pre-production samples of the iPhone 6 available by the end of October and at that time we will be able to update the drop test videos with a clip demonstrating the product with an iPhone 6. You can view some early mock-up drawings of the Rhino Shield Crash Guard bumper for the iPhone 6 here: https://www.dropbox.com/sh/vd7splmhw4iqroo/AABd3iJTpDq4227HsCjsRauBa?dl=0#/ The Crash Guard bumper for the iPhone 6 and 6 Plus will be modeled on the same curved edge design of the device itself, the way Apple intended for it to appear. The bumper will elevate the device slightly so the back of the device is not in direct contact with the surface it is resting on. This element of the design also means that the lens of the iPhone 6 and 6 Plus will be slightly elevated and will not be in contact with the flat surface. As we approach 2,000 supporters for our project, the press is finally beginning to pay attention, and we hope to have some surprises for you shortly. Please keep sharing our story with your friends and family. From your friends at Evolutive Labs, thanks again for your support. We wouldn ’t be able to do this without you. --

※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 111.255.41.147 ※ 文章網址: http://webptt.com/m.aspx?n=bbs/iPhone/M.1413232896.A.BE8.html ※ 編輯: abin0818 (111.255.41.147), 10/14/2014 05:24:19