作者chriscloud (尋)
看板hardware
標題[除錯] 新電腦會自行重開機
時間Wed Sep 2 12:44:30 2009
CPU：AMD Althon II 240
MB ：MA785GPMT-UD2H
RAM：威剛DDR3-1600 2G*2
VGA：內顯
HDD：WD 640G AAKS
PSU：Be Quiet 400W (舊版非Deluxe)
O.S：WinXP 32位元版 SP2
﹝問題詳述﹞昨晚組好電腦後，在灌常用的程式過程中，重開機好幾次。我發現重開機的
時間點，我都正在同時做一堆事，如：一次開好幾個FTP從舊電腦抓東西過去
，同時灌一堆有的沒的常用軟體...
另二次重開機是發生在我邊打BBO，邊抓FTP。
另外，昨天驗機時發現，剛開機顯示的記憶體時脈為1066非1600，
進BIOS後，工程師也不知道怎麼改...= =
回家後發現可以改為1600，不知道是不是因為我動了default記憶體設定值
所以容易重開機??
﹝已做努力﹞試過用HD Tune掃硬碟是否有壞軌，發現一切正常。
今早睡覺前放燒機程式(Orthos)給他跑，結果剛剛發現電腦一直BB叫，
Orthos視窗也顯示STOPPED(原本GO的地方)，在splog檔案有看到error：
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time:
15
CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.]
CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.]
2009/9/2 上午 04:19
Launching 2 threads...
1:Using CPU #0
2:Using CPU #1
1:Beginning a continuous self-test to check your computer.
2:Beginning a continuous self-test to check your computer.
1:Press Stop to end this test.
2:Press Stop to end this test.
1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
2:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
1:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
2:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
1:Torture Test ran 6 minutes 32 seconds - 0 errors, 0 warnings.
1:Execution halted.
2:Torture Test ran 6 minutes 32 seconds - 0 errors, 0 warnings.
2:Execution halted.
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time:
15
CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.]
CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.]
2009/9/2 上午 07:01
Launching 2 threads...
2:Using CPU #1
1:Using CPU #0
2:Beginning a continuous self-test to check your computer.
1:Beginning a continuous self-test to check your computer.
2:Press Stop to end this test.
1:Press Stop to end this test.
2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
2:Torture Test ran 2 minutes 21 seconds - 0 errors, 0 warnings.
2:Execution halted.
1:Torture Test ran 2 minutes 21 seconds - 0 errors, 0 warnings.
1:Execution halted.
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time:
15
CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.]
CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.]
2009/9/2 上午 07:12
Launching 2 threads...
1:Using CPU #0
2:Using CPU #1
1:Beginning a continuous self-test to check your computer.
2:Beginning a continuous self-test to check your computer.
1:Press Stop to end this test.
2:Press Stop to end this test.
1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
2:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
1:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
2:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
1:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
2:FATAL ERROR: Rounding was 0.5, expected less than 0.4
2:Hardware failure detected, consult stress.txt file.
2:Torture Test ran 6 minutes 54 seconds -
1 errors, 0 warnings.
2:Execution halted.
1:Torture Test ran 6 minutes 54 seconds - 0 errors, 0 warnings.
1:Execution halted.
煩請各位版眾幫忙解答，
倘若真的不行，只好再抱回去給店家弄了...QQ
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 112.104.103.156
※ 編輯: chriscloud 來自: 112.104.103.156 (09/02 13:05)
1F：推 maniaque:這種穩定度的"新電腦",比我最近湊舊零件的P4 2.6 還慘... 09/02 13:28
2F：→ maniaque:而且看起來非常嚴重,halt 就算了,連error 都出來了... 09/02 13:29
3F：→ maniaque:不要動記憶體設定,維持 default 先跑看看吧... 09/02 13:29
4F：→ maniaque:嗯...會當雞的電腦,送我我可能都要考慮... ^_^ 09/02 13:30
5F：推 maniaque:ㄨL我給外甥那台電腦最近回廠... 09/02 13:32
6F：→ chriscloud:但 我買的RAM本來就是1600，只是在開機時看到顯示為 09/02 13:41
7F：→ chriscloud:1033，所以才進BIOS改為1600，所以威剛的1600是騙人的 09/02 13:42
8F：→ chriscloud:嗎...@@a 09/02 13:42
9F：→ serlontw:原PO先開CPU-Z看SPD資料在說吧.... 09/02 13:48
10F：→ chriscloud:等晚上我回家之後會看的，謝樓上兩位建議 m(_ _)m 09/02 14:09