作者BILL6042665 (蘇察哈爾汗)
看板Physics
標題[問題] 熱膨脹相關問題
時間Wed Nov 30 00:24:07 2011
總共三個問題
1.若將一半徑為R的均勻金屬圓環,剪下一段缺口,設此小段弧長為d,d遠小於R,
今將此具有圓環的缺口加熱,試討論是否當溫度夠高時,帶缺口的圓環能變成密合。
不太知道從何思考起,直覺得來想應該是會密合吧??
不過若膨脹是等比例的,那會變成一個較大而有缺口(缺口比例相等)的環吧?
2.A thin film with refraction index n=1.40 for light ofwavelength 589 nm, is
placed in one ann of a Michelson interferometer. If a shift of 7.00 fringes
occurs, what is the film thickness?
3.If a substrate with· refraction index n=3.3 for light of wavelength 589 nm,
is coated by a thin film: used for an anti-reflection (AR) coating, what is
the thickness and n ofthis thin film?
謝謝指教
--
│ ███ ▂▄▃
││││
│ ˋ ◤Mooncat~◥││││ 「為什麼
,
│ ‵ ◤ ◥▏*_▂▁ ▋
│││ 為什麼教授這麼雞掰
│ ′ 、▌█
▊▉▏ │ 沒天理啊
……
…」
◢ ◤◢
◣▋◢ █
▋▊ ▕▅▇
◥◥*Mooncat~
◢ ▂▇ˋ█▆◤
▂_ ▁▄▆▇▃ by bbxsky
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 111.250.54.247
※ 編輯: BILL6042665 來自: 111.250.54.247 (11/30 00:42)
1F:→ Entropy1988:那就要看圓環的溫度分佈吧? 12/01 18:00
2F:→ BILL6042665:題目只有給這樣耶。沒有人可以教我這三題嗎... 12/01 21:39
3F:→ spencer90235:1.缺口放大 把缺口對面相同長度的金屬段"固定"加熱看 12/01 23:51
4F:→ spencer90235:2.干涉條紋相位差來自film 3.全反射 12/01 23:52
5F:→ BILL6042665:謝謝樓上大大 12/02 01:40
6F:→ BILL6042665:第三題全反射要怎麼列式阿,還是不太懂。 12/02 01:53
7F:→ spencer90235:入射光進入coating layer後再進入介質 不論入射光角 12/02 13:32
8F:→ spencer90235:度如何 全反射都不發生 12/02 13:33
9F:→ spencer90235:厚度則是考慮coating layer的干涉 12/02 13:34