作者rossi24 (科目)
看板Master_D
標題[請益]英文摘要卡關
時間Thu Apr 26 10:51:45 2012
In order to confirm will increase yield strength can reduce isolation
displacement under near-fault motion.
本文對隔震橋之隔震支承,提出兩種設計方法。在隔震參數設計的過程中,固定
等效隔震勁度與設計位移,在分別限制等效阻尼比與隔震器韌性比。
The two different determined the parameters design procedure for isolated
bridge supported on bi-linear isolator. The step by step procedure
description follows. First fixed effective stiffness and design displacement
Second given target effective damping ratio and ductility, respectively.
藉由調整彈性勁度比,可完成隔震參數設計且能提高降伏強度。
這一句就不知道該如何動筆。懇請各位指點。
以下為隔震系統部份之英文名詞
鉛心橡膠支承墊 : Lead-rubber bearings
隔震系統 : Isolation system
降伏強度 : Yield strength
等效隔震勁度 : Effectiveness stiffness
設計位移 : Design displacement
等效阻尼比 : Effective damping ratio
韌性比 : Ductility ratio
彈性勁度比 : Elastic stiffness ratio
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 140.127.7.233
1F:→ mummyqq:這英文.. 04/26 13:17
2F:→ wawi2:先從英文基本句型+熟悉單字詞性起步吧 04/26 13:24
3F:→ shoppinglin:主詞 動詞 受詞抓一下... 04/26 14:51
4F:→ i555639:感覺你的文法錯很大... 04/26 18:33
5F:推 LebronKing:這感覺是辜狗翻譯吧@@ 04/27 09:27
6F:→ semantics:只給一句 並不能解決你的摘要問題喔... 04/27 10:29
7F:→ rossi24:請問大家是怎樣克服撰寫英文摘要的關卡? 04/27 13:23
8F:→ wawi2:這根本就不是寫文章的問題...而是... 04/27 14:40
9F:→ rossi24:英文基本能力問題 04/27 15:08
10F:推 Fradi:一句話有好幾個動詞@@ 04/28 17:30