我在rc.conf中已經設定網卡(fxp0) 但每次開機後 ifconfig fxp0就是沒有inet 導致無法連線 自己下了ifconfig fxp0 inet 192.168.0.1 之後就一切正常了 從FreeBSD 4.2用到現在 沒發生過這麼詭異的問題 以下是我的rc.conf內容: # -- sysinstall generated deltas -- # Sat Aug 13 21:33:02 2005 # Created: Sat Aug 13 21:33:02 2005 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. ifconfig_fxp0="inet 192.168.0.1 netmask 255.255.255.0" hostname="server.eyecity.com.tw" linux_enable="YES" sshd_enable="YES" sendmail_enable="NONE" #設定自動選擇連線裝置 network_interfaces="xl0" ifconfig_xl0="inet 10.0.0.1 netmask 255.0.0.0 -arp up" #一開機就執行 PPPoE(建議) ppp_enable="YES" #ddial 表示只要斷線便自動連線(建議)，或設 auto 表示有資料要 #出去則自動連線，也可以設為 background 只連一次後放到背景 ppp_mode="ddial" ppp_profile="pppoe" defaultrouter="10.0.0.1" gateway_enable="YES" #以下的設定如果不使用 NAT 則可省略 firewall_enable="YES" firewall_type="OPEN" natd_interface="xl0" natd_enable="YES" postfix_enable="YES" clamav_clamd_enable="YES" # 開機自動啟動 clamav. clamav_freshclam_enable="YES" # 讓 freshclam 於開機時自動以 daemon 方式啟動. amavisd_enable="YES" # 讓 amavisd 開機自動啟動. 以下是ifconfig show出的畫面: fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_MTU> ether 00:02:55:1e:30:8b media: Ethernet autoselect (100baseTX <full-duplex>) status: active xl0: flags=88c3<UP,BROADCAST,RUNNING,NOARP,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> inet6 fe80::204:75ff:feae:ffc8%xl0 prefixlen 64 scopeid 0x2 inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255 ether 00:04:75:ae:ff:c8 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8008<LOOPBACK,MULTICAST> mtu 16384 tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 inet 220.134.163.45 --> 218.175.168.254 netmask 0xffffff00 Opened by PID 212 PS: xl0是負責ADSL的連線 煩請各位先進幫我找問題了 謝謝 -- 　藍　＊**。˙∵‥∴**＊**。˙∵‥。˙∵‥∴。˙。˙∵‥∴**＊＊。˙ 　色　　　┬┴┬┴┬┴┬┴◆ Origin: 藍色傳說　bbs.seehere.org 　傳　　┬┴┬┴┬┴┬┴◇ From: 218-175-188-55.dynamic.hinet.net 　說　＊**。˙∵‥∴**‧꼪*。˙∵‥。˙∵‥∴。˙∵‥。˙∵‥∴**＊＊