我在rc.conf中已经设定网卡(fxp0) 但每次开机後 ifconfig fxp0就是没有inet 导致无法连线 自己下了ifconfig fxp0 inet 192.168.0.1 之後就一切正常了 从FreeBSD 4.2用到现在 没发生过这麽诡异的问题 以下是我的rc.conf内容: # -- sysinstall generated deltas -- # Sat Aug 13 21:33:02 2005 # Created: Sat Aug 13 21:33:02 2005 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. ifconfig_fxp0="inet 192.168.0.1 netmask 255.255.255.0" hostname="server.eyecity.com.tw" linux_enable="YES" sshd_enable="YES" sendmail_enable="NONE" #设定自动选择连线装置 network_interfaces="xl0" ifconfig_xl0="inet 10.0.0.1 netmask 255.0.0.0 -arp up" #一开机就执行 PPPoE(建议) ppp_enable="YES" #ddial 表示只要断线便自动连线(建议)，或设 auto 表示有资料要 #出去则自动连线，也可以设为 background 只连一次後放到背景 ppp_mode="ddial" ppp_profile="pppoe" defaultrouter="10.0.0.1" gateway_enable="YES" #以下的设定如果不使用 NAT 则可省略 firewall_enable="YES" firewall_type="OPEN" natd_interface="xl0" natd_enable="YES" postfix_enable="YES" clamav_clamd_enable="YES" # 开机自动启动 clamav. clamav_freshclam_enable="YES" # 让 freshclam 於开机时自动以 daemon 方式启动. amavisd_enable="YES" # 让 amavisd 开机自动启动. 以下是ifconfig show出的画面: fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_MTU> ether 00:02:55:1e:30:8b media: Ethernet autoselect (100baseTX <full-duplex>) status: active xl0: flags=88c3<UP,BROADCAST,RUNNING,NOARP,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> inet6 fe80::204:75ff:feae:ffc8%xl0 prefixlen 64 scopeid 0x2 inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255 ether 00:04:75:ae:ff:c8 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8008<LOOPBACK,MULTICAST> mtu 16384 tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 inet 220.134.163.45 --> 218.175.168.254 netmask 0xffffff00 Opened by PID 212 PS: xl0是负责ADSL的连线 烦请各位先进帮我找问题了 谢谢 -- 　蓝　＊**。˙∵‥∴**＊**。˙∵‥。˙∵‥∴。˙。˙∵‥∴**＊＊。˙ 　色　　　┬┴┬┴┬┴┬┴◆ Origin: 蓝色传说　bbs.seehere.org 　传　　┬┴┬┴┬┴┬┴◇ From: 218-175-188-55.dynamic.hinet.net 　说　＊**。˙∵‥∴**‧꼪*。˙∵‥。˙∵‥∴。˙∵‥。˙∵‥∴**＊＊