作者nick1119 (Uncle C)
站內CD-R
標題Re: [問題] Disc-at-Once 跟96 有不同嗎??
時間Sun Sep 20 06:47:30 2009
sub= 子瀕道(通常game會空間放些東西)
DAO只是一個統稱，目前大多數的燒錄機都支持，除了前其Philip等極少數的不支持，
DAO96就不是每台都支持了，因此選用DAO96是最適合自己燒錄機情況的。
以下是區別了!
RAW-DAO 96 = 2352 bytes RAW Data + 96 Bytes P-W Subchannel Data.
This is the best mode for CloneCD. It allows writing of all subchannel
information, including Digital Signatures, CD-Text, ISRC, Catalog Numbers,
CD+G, CD+Midi, Gaps, Indices and Crazy TOCs.
RAW-DAO 94 = 2352 bytes RAW Data + 94 Bytes P-W Subchannel Data. Same as
RAW-DAO 96, but 2-Bytes CRC of the Q Subchannel are generated by the writer.
RAW-DAO 16 = 2352 bytes RAW Data + 16 Bytes P-Q Subchannel Data. This is the
second best mode for CloneCD. It allows writing of most subchannel information,
including most Digital Signatures, ISRC, Catalog Numbers, Gaps, Indices and
Crazy TOCs. 2-Bytes CRC of the Q Subchannel are generated by the writer.
RAW-SAO = 2352 bytes RAW Data. This is the third best mode for CloneCD.
Feature support is drive dependend. ISRC, Catalog Numbers and Indices can be
written. Usually CD-Text, CD+G and CD+MIDI can be written as well. Crazy TOCs
and Digital Signatures can't be written in this mode.
SAO = 2352 bytes error corrected Data. This is the worst mode for CloneCD.
Writing of ISRC, Catalog Numbers, Indices and usually CD-Text is supported.
所以DAO96是最適合燒刻加密碟的，其實以常用的Nero也有一定的可加密碟的能力
用複製的方式無法製作開機光碟，說真的沒遇到過，還以為你是用 NERO 資料 + 開機印象
檔，這就有一點複雜，原PO有確定你原先要複製的光碟片有支援光碟開機？
※ 引述《goss (goss)》之銘言：
: 我想對燒..開機光碟不過
: 選項出現
: http://www.badongo.com/pic/7151909
: DAO跟96選項
: 我2個都查過20~30個網站了巴
: 大部分都在講DAO是做啥...
: 有提到96的網站 都把DAO跟96寫在一起講解
: 我想燒成也能開機的光碟
: 請問用哪個比較好????????????
: 如果可以的話
: 能講一下96的功能嗎?????
: 大部分網站都在寫DAO 如果也順便講解大家也都會比較明白
--
寂寞部屋之意慾蔓延
http://www.wretch.cc/blog/cyc1119
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 218.173.196.120
1F：→ goss:DAO96 你好像也是合在一起講 09/20 19:43
2F：→ goss:我沒說燒出來的不能開機啦...只是燒前想先問清楚 09/20 19:44