作者nick1119 (Uncle C)
站内CD-R
标题Re: [问题] Disc-at-Once 跟96 有不同吗??
时间Sun Sep 20 06:47:30 2009
sub= 子濒道(通常game会空间放些东西)
DAO只是一个统称，目前大多数的烧录机都支持，除了前其Philip等极少数的不支持，
DAO96就不是每台都支持了，因此选用DAO96是最适合自己烧录机情况的。
以下是区别了!
RAW-DAO 96 = 2352 bytes RAW Data + 96 Bytes P-W Subchannel Data.
This is the best mode for CloneCD. It allows writing of all subchannel
information, including Digital Signatures, CD-Text, ISRC, Catalog Numbers,
CD+G, CD+Midi, Gaps, Indices and Crazy TOCs.
RAW-DAO 94 = 2352 bytes RAW Data + 94 Bytes P-W Subchannel Data. Same as
RAW-DAO 96, but 2-Bytes CRC of the Q Subchannel are generated by the writer.
RAW-DAO 16 = 2352 bytes RAW Data + 16 Bytes P-Q Subchannel Data. This is the
second best mode for CloneCD. It allows writing of most subchannel information,
including most Digital Signatures, ISRC, Catalog Numbers, Gaps, Indices and
Crazy TOCs. 2-Bytes CRC of the Q Subchannel are generated by the writer.
RAW-SAO = 2352 bytes RAW Data. This is the third best mode for CloneCD.
Feature support is drive dependend. ISRC, Catalog Numbers and Indices can be
written. Usually CD-Text, CD+G and CD+MIDI can be written as well. Crazy TOCs
and Digital Signatures can't be written in this mode.
SAO = 2352 bytes error corrected Data. This is the worst mode for CloneCD.
Writing of ISRC, Catalog Numbers, Indices and usually CD-Text is supported.
所以DAO96是最适合烧刻加密碟的，其实以常用的Nero也有一定的可加密碟的能力
用复制的方式无法制作开机光碟，说真的没遇到过，还以为你是用 NERO 资料 + 开机印象
档，这就有一点复杂，原PO有确定你原先要复制的光碟片有支援光碟开机？
※ 引述《goss (goss)》之铭言：
: 我想对烧..开机光碟不过
: 选项出现
: http://www.badongo.com/pic/7151909
: DAO跟96选项
: 我2个都查过20~30个网站了巴
: 大部分都在讲DAO是做啥...
: 有提到96的网站 都把DAO跟96写在一起讲解
: 我想烧成也能开机的光碟
: 请问用哪个比较好????????????
: 如果可以的话
: 能讲一下96的功能吗?????
: 大部分网站都在写DAO 如果也顺便讲解大家也都会比较明白
--
寂寞部屋之意慾蔓延
http://www.wretch.cc/blog/cyc1119
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 218.173.196.120
1F：→ goss:DAO96 你好像也是合在一起讲 09/20 19:43
2F：→ goss:我没说烧出来的不能开机啦...只是烧前想先问清楚 09/20 19:44