作者dukes (Xd)
看板blind_pc
标题[转贴] Mobile Speak 4操作命令列表
时间Thu Mar 4 17:50:50 2010
Mobile Speak 4操作命令列表
注:
键盘操作命令在设有键盘的触控屏设备中亦能使用。
在触控屏的Windows Mobile手机中,command键预设是长按Enter。这也可
在Mobile Speak设定 > 选项 > 命令键中变更。
在Windows Mobile smart phone ,预设command键是Home键。同样这也可以
在Mobile Speak设定 > 选项 > 命令键中变更。
在Symbian手机中,command键则视乎不同型号的手机而不同。这可以是相机、行
事历等键。相关的设定可以在Mobile Speak设定 > 选项 > 命令键中变更。
1.1:预设Layout
Command + 0:开关静音
Command + 0 长按:开关放大
Command + 1:阅读时间及日期
Command + 2:阅读现时焦点所在项目
Command + 2 长按:显示主画面 (WM Only)
Command + 3:切换到检视游标 (WM Only)
Command + 3 长按:虚拟化化屏幕文字 (WM Only)
Command + 4:开关用户字典
Command + 4 长按:打开用户字典
Command + 5:切换命令Layouts
Command + 5长按:命令描述 (键盘说明模式) Mode
Command + 6:快速选单 (WM Only)
Command + 6 长按:切换蓝牙耳机 – 继续按6键切换到不同选项 (WM
only)Only)
Command + 7:变更阅读资料多寡
Command + 7 长按:关闭程式 (WM Only)
Command + 8:串出讯息
Command + 8 长按:开关点字 (WM Only)
Command + 9:改变键盘回音
Command + *:朗读历史
Command + * 长按:秘密模式朗读层级
Command + #:读整个屏幕
Command + # 长按:打开开始功能表 (WM Only)
Command + Left Soft Key:读手机状态, 在某些程式读额外资料(读已选取的文
字 WM)
Command + Right Soft Key:设定
Command + 上方向键:增加音量
Command + 上方向键 长按:读上一行 (Symbian Only)
Command + 下方向键:减少音量
Command + 下方向键 长按:读下一行 (Symbian Only)
左方向键 长按:向前快转朗读内容 (WM Only)
Command + 左方向键:减少语音速度
Command + 左方向键 长按:读上一字 (Symbian Only)
Command + 右方向键:增加语音速度
Command + 右方向键 长按:读下一字 (Symbian Only)
Command + Enter / Return:读出Soft Keys
Command + Dial:转换程式 (WM Only)
Command + Dial:开关点字 (Symbian Only)
Command + Hang up:开关私隐模式 (WM Only)
Command + Back:切换Profile
1.2:阅读 Layout
Command + 0:开关静音
Command + 0长按:开关放大
Command + 1:读上一句
Command + 1长按:读日期及时间and
Command + 2:从开端开始阅读
Command + 2 长按:移到顶端
Command + 3:下一句
Command + 3长按:虚拟化屏幕文字 (WM Only)
Command + 4:上一字
Command + 4长按:打开用户字典
Command + 5:切换命令Layouts
Command + 5 长按:命令描述 (键盘说明模式)
Command + 6:下一字
Command + 6长按:开关蓝牙耳机 (WM Only)
Command + 6 长按:读出现时所在字 (Symbian Only)
Command + 7:读上一段
Command + 7 长按:改变标点阅读多寡
Command + 8:从现时位置开始阅读
Command + 8 长按:到最尾
Command + 9:读下一段
Command + 9 长按:改变键盘回音
Command + *:语音朗读历史
Command + * 长按:秘密模式层级
Command + #:读出整个画面
Command + # 长按:打开开始功能表 (WM Only)
Command + # 长按:串出现时字 (Symbian Only)
Command + Left Soft Key:读出手机状态, 额外的资讯在某些程式(及读出已选
取的文字 WM)
Command + Right Soft Key:设定
Command + 上方向键:增加音量
Command + 上方向键 长按:复制已选取的文字 (WM Only)
Command + 上方向键长按:读上一行 (Symbian Only)
Command + 下方向键:减少音量
Command + 下方向键 长按:贴上 (WM Only)
Command + 下方向键 长按:读下一行 (Symbian Only)
左方向键 长按:向前快转语音 (WM Only)
Command + 左方向键:减少语音速度
Command + 左方向键 长按:剪下已选取的文字 (WM Only)
Command + 左方向键 长按:读上一字 (Symbian Only)
Command + 右方向键:增加语音速度
Command + 右方向键 长按:开关选择模式 (WM Only)
Command + 右方向键 长按:读下一字 (Symbian Only)
Command + Enter / Return:读Soft Keys
Command + Dial:切换程式 (WM Only)
Command + Dial:开关点字 (Symbian Only)
Command + Hang up:切换私隐模式 (WM Only)
Command + Back:切换Profile
1.3:放大Layout
Command + 0:开关静音
下方向键 长按:下移
Command + 下方向键:减少放大
Command + 下方向键 长按:读下一行 (Symbian Only)
左方向键 长按:左移
Command + 左方向键:切换放大镜
Command + 左方向键 长按:读上一字 (Symbian Only)
右方向键 长按:右移
Command + 右方向键:切换画面layout
Command + 右方向键 长按:读下一字 (Symbian Only)
Command + Enter / Return:读Soft Keys
Command + Dial:切换程式 (WM Only)
Command + Dial:切换点字 (Symbian Only)
Command + Hang up:切换私隐模式 (WM Only)
Command + Back:切换Profile
2:触控屏的命令
2.1:一般
点击两下:等同Enter / Return
点两下并长按:快速选单
点三下:离开命令Layout 或解除锁定画面
向左滑动:左方向键
向右滑动:右方向键
向下滑动:下方向键
向上滑动:上方向键
向任意方向滑动并长按:命令列表
点击1区:移到Layout
点击1区并长按:打开开始功能表
点击2区:设定/ 放大设定Layout
点击2区并长按:最小化程式并到主画面
点击3区:停止语音
点击3区并长按:切换私隐模式
点击4区:语音Layout
点击4区并长按:锁定屏幕
2.2:移至Layout
点击三下:离开命令Layout
点两下并长按:快速选单
向任何方向滑动并长按:命令列表
向左滑动:到上一标签页
向右滑动:到下一标签页
向上滑动:到视窗内的上一项目
向下滑动:到视窗内的下一项目
点击2区:命令描述模式
点击3区:右Soft Key
点击4区:左Soft Key
点击2区两下:虚拟化画面文字
点击3区两下:御览游标
点击4区两下:切换程式
点击1区并长按:离开程式
点击2区并长按:显示快显功能表
点击3区并长按:到工作列
点击4区并长按:开启虚拟键盘
2.3:设定Layout
点击三下:离开命令Layout
点击两下并长按:快速选单
向左滑动:减少语音速度
向右滑动:增加语音速度
向上滑动:增加音量
向下滑动:减少音量
向任何方向滑动并长按:命令列表
点击1区:开关静音
点击2区:开关点字
点击3区:开关蓝牙耳机
点击4区:开关放大
点击1区两下:秘密模式层级
点击2区两下:变更键盘回音
点击3区两下:设定
点击4区两下:变更标点层级
点击1区并长按:开关串字模式
点击2区并长按:切换图像阅读层级
2.4:阅读Layout
点击三下:离开命令Layout
点两下并长按:快速选单
向任何方向滑动并长按:命令列表
点击1区:阅读Soft Keys
点击2区:阅读日期及时间
点击3区:阅读画面
点击4区:串出讯息
点击两下1区:读上一讯息
点击两下2区:读手机状态或额外讯息在某些程式
点击两下3区:读现时焦点项目
点击两下4区:以拼字方式串出
点击1区并长按:读现时句
点击2区并长按:从开端开始阅读
点击3区并长按:从现时位置开始阅读
点击4区并长按:晋阶阅读layout
2.5:放大设定Layout
点击三下:离开命令layout
点击两下并长按:快速选单
向上滑动:增加音量
向下滑动:减少音量
向左滑动:减少放大
向右滑动:增加放大
向任何放向滑动并长按:命令列表
点击1区:切换画面layout
点击3区:切换颜色
点击4区:开关放大
点击1区两下:视窗标题
点击2区两下:到Soft Keys
点击3区两下:放大设定
点击4区两下:切换边界
点击1区并长按:开关字体平滑
点击2区并长按:开关自动移动
2.6:晋阶阅读Layout
点击三下:离开晋阶阅读Layout
向下滑动:读下一行
向上滑动:读上一行
向右滑动:读下一字母
向右滑动:读下一字母
点击1区:读上一字
点击2区:读下一字
点击3区:读下一句
点击4区:读上一句
点击1区两下:到最顶
点击2区两下:到最底
点击3区两下:读下一段
点击4区两下:读下一段
点击1区并长按:撤换选择模式
点击2区并长按:当选取模式开时读出已选取文字及当选取模式关时读出贴上
点击3区并长按:复制
点击4区并长按:剪下
3:额外键盘命令
3.1:御览游标
Key 1:上一字
Key 2:到最顶
Key 3:下一字
Key 4:上一句
Key 5:文字格式资讯
Key 6:下一句
Key 7:上一行
Key 8:图像标记器
Command Key:离开御览游标
3.2:Windows Media Player
Enter / P / Space Key:暂停及继续
长按 Enter / S Key:停止
B / 7 Key:上一音轨
N / 9 Key:下一音轨
右方向键 Key:快速往後转
左方向键 Key:往回转
长按 Down / G Key:到
A / 2 Key:重复播放现时音轨
M / 5 Key:at current 加入标记位置
D / 3 Key:删除标记
L / 1 Key:删除所有标记
R / 4 Key:到上一标记
F / 6 Key:到达下一标记
T / 8 Key:读出歌曲名
长按 Up / X Key:读出现时播放时间
U / 0 Key:开关声音
上方向键 Key:增加音量
下方向键 Key:减少音量:
3.3:Internet Explorer
下方向键:到网页的下一个项目
上方向键:到网页的上一个项目
右方向键:根据跳跃模式设定跳到下一个项目
左方向键:根据跳跃模式设定跳到上一个项目
Key 1:将焦点移到地址列
Key 0:到页首或页尾
Key 2 (C-Control):切换跳跃模式:; 跳到同类控制,跳到不同控制,跳到图像
控制,续字母跳跃。
Key 3 (F-Forms):切换跳跃模式: 依表单跳跃; 依编辑区跳跃;依按钮跳跃; 依
核取方块及单选按钮跳跃;依下拉方块及清单方块跳跃
Key 4 (H-Headings):切换跳跃模式: 依照标题和框架跳跃;依照标题跳跃;依照
框架跳跃
Key 5 (L-Links):切换跳跃模式: 依照连结跳跃; 依照非连结跳跃; 依照此页连
结跳跃
Key 6 (M-Move):按照固定百分比在该页跳跃 (在项目) 或根据标记。选项包括:
标记, 2%, 5%, 及 10%.
Key 7 (P-Paragraph):切换跳跃模式:依照段落或引用跳跃;依照段落跳跃;依照
引用跳跃
Key 8 (T-Tables):切换跳跃模式:依照表格或列表跳跃; 依照列表跳跃; 依照表
格跳跃
Key 9:在现时 Press and hold this key in order to clear markers. Note
that markers 位置加入标记are automatically cleared whenever a new page
is loaded.
Back Key:返回上页
# (Hash) Key:打开搜寻视窗,容许用户输入搜寻关键字。使用左右方向键跳到
上或下一个搜寻结果。
* (星键):跳过现时部份,例如在表格中跳到下一列。
Enter Key:视乎不同项目而有不同作用,例如在连结是点击;在编辑区则进入编
辑模式。
4:额外触控命令
4.1:御览游标
向左滑动:上一字母
向右滑动:下一字母
向上滑动:上一行
向下滑动:下一行
点击两下:Enter / Return
点击三下:离开御览游标
点击1区:上一字
点击2区:下一字
点击3区:晋阶命令
点击4区:到顶端
Advanced Commands 点击1区:文字格式资讯
Advanced Commands 点击2区:显示图像标签器
4.2:虚拟触控键盘
向左滑动:上一字母
向右滑动:下一字母
向上滑动:上一行
向下滑动:下一行
点击1区*:切换到动态/静态键盘模式
点击2区:等同按Back key
点击3区:等同按Return key.
点击3区两下*:到下一键盘Layout
点击2区两下*:到上一键盘layout
点击4区两下*:到下一语言
点击1区两下*:到上一语言
点击三下:离开虚拟键盘
* After performing these commands, one can use single tap anywhere to
keep cycling the command assignment. Note – 5 seconds of inactivity
will turn off this mode or one can use triple tap to go back to Virtual
Keyboard.
4.3:Stylus Mode
-:When Stylus mode is turned on Command Key Mode will allow all touch
Gestures.
-:To Turn off Stylus Mode, Long press Volume Up Key.
4.4:文字选取模式命令
-:Commands for Next / Previous Character (Slide Right / Left) will
select Next / Previous Character.
-:Command for Next / Previous Line (Slide Down / UP) will select Next
/ Previous Line.
-:Command for Next / Previous Word (Tap 2 / Tap 1) will select Next /
Previous Word.
-:Command for Next / Previous Sentence (Tap 4 / Tap 3) will select
Next / Previous Sentence.
-:Command for Go to Home will select from the cursor to the Beginning.
-:Command for Go to End will select from the cursor to the End.
-:
4.5:命令列表命令
向下滑动:到下一个命令
向上滑动:到上一个命令
向右滑动:在命令列表中跳过三个项目
向左滑动: 在命令列表中跳前三个项目
点击一下:读出命令说明
点击两下:选择选取的命令
点击三下:离开命令列表
4.6:Windows Media Player
点击三下:在WMP Layout 和预设Layout之间切换
点击1区两下并长按:读出现时播放时间
点击2区两下并长按:开关声音
点击1区:暂停/继续
点击2区:读出歌曲名
点击3区:下一音轨
点击4区:上一音轨
点击1区两下:停止
点击2区两下:重复现时音轨
点击3区两下:到下一标记
点击4区两下:到上一标记
点击1区并长按:移到
点击2区并长按:在现时位置加入标记
点击3区并长按:删除所有标记
点击4区并长按:删除标记
向右滑动:向前快转
向左滑动:向後快转
向上滑动:增加音量
向下滑动n:减少音量
4.7:Internet Explorer Layout
Triple Tap:Toggle between Default and IE Layout
Slide Down:Move forward one element in the web page.
Slide Up:Move back one element in the web page.
Slide Right:Jump forward one element based on the current Jump Mode
Slide Left:Jump back one element based on the current Jump Mode.
Double Tap anywhere:Perform Enter -Appropriate behavior depending on
the type of control. For example, when currently focused on a link,
activates the link. When currently focused on a text entry box, open
the editor so that text can be entered.
Tap1 Hold:Internet Jump Mode Layout
Tap2 Hold:Advance Reading – same as SpeakLayout > Advance Reading
commands
Tap3 Hold:Skip the current section. The behavior of this command
depends on where you’re currently located. For example, if pressed in
a table row, the virtual buffer will move to the beginning of the next
row.
点击4区并长按:将焦点移到地址列
4.8:Internet 跳跃模式Layout
Slide Down:Move forward one element in the web page.
Slide Up:Move back one element in the web page.
Slide Right:Jump forward one element based on the current Jump Mode
Slide Left:Jump back one element based on the current Jump Mode.
Tap1:Add a bookmark at the current position
Tap2:Toggles the Jump Mode between: Jump to same control; Jump to
different control; Jump to graphical control; Jump by characters.
Tap3:Toggles the Jump Mode between: Jump by forms; Jump by editors;
Jump by buttons; Jump by checkbox and radio button; Jump by combo box
and list box.
Tap4:Toggles the Jump Mode between: Jump by headings and frames; Jump
by headings; Jump by frames.
Tap1 Double:Toggles the Jump Mode between: Jump by links; Jump by
non-links; Jump by in-page links.
Tap2 Double:Move forward or backward in the page by a fixed percentage
of the page size (in elements) or by bookmarks. Options are: Bookmarks,
2%, 5%, and 10%. Information about the current element number in the
page is also provided to give an indication of your current location in
the page.
Tap3 Double:Toggles the Jump Mode between: Jump by paragraph and block
quotes; Jump by paragraph; Jump by block quotes.
Tap4 Double:Toggles the Jump Mode between: Jump by table and list;
Jump by list; Jump by table.
Tap1 Hold:Clear markers. Note that markers are automatically cleared
whenever a new page is loaded.
Tap2 Hold:Move backwards in the navigation history.
Tap3 Hold:Opens a search window, allowing the user to enter a search
term. The left and right joystick keys can then be used to repeatedly
jump through and move to the next found element.
点击4区并长按:到页首/页尾
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 163.13.224.25