由於官网都没写上更新了啥东东 只能去BLOG看看国外的讨论 其中似乎有开发人员对此发表意见 以下是原文: Hi. I am in charge of product development for SteelSeries. Here’s some feedback on what we are doing for Kinzu tracking performance. Mouse tracking is complicated and there are numerous tradeoffs in the parameters to optimize performance at all speeds. We acknowledge that we had positive acceleration, especially on 800 and 1600 CPI. Actually the tracking at fast speeds was pretty good but the tracking at slow speeds was too slow which would lead to a feeling of positive acceleration. We released SW version 1.0.9 to fix it at 800 CPI and then we just released version 1.0.10 to do the same thing at 1600 CPI. We hope that you see an improvement when using these releases. Make sure you hit the Apply button after opening the SW. The SW doesn’t actually do anything but modify some of the parameters in the mouse memory, but the parameters are not changed until you hit Apply. We will continue to gather user feedback and conduct tests on parameter changes and will probably have additional releases in the future. We’ll keep trying to make it better and better. Arnie – SteelSeries Product Development 似乎在800、1600DPI的加速、稳定设定不好拿捏这样 程式载点: http://cdn.steelseries.com/mice/Kinzu_v1.0.10.exe --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 112.104.76.106