我直接先把他的信件公开在这里 看的懂英文的就直接看吧 大概就可以了解我会有点生气、难过的原因 再补上中文说明 Dear Ian, As mentioned earlier the keyboard G80-3000HKMUS has been obsoleted and is no longer available. We have the following alternatives: 1) If the customer insists in USB hub we can offer G83-6504 (with 4 USB downstream ports). It can be done with Chinese characters and lasered keytops but it is not "MX" switch (membrane keyboards) 2) For mechanical keyswitch solution we can offer G80-3000LUNUS-2: MX keyswitches can be changed to MX1A-G1JW, lasered keytops, USB cable, but no hub ports, US layout, 104 keys. Note: - for home position of F and J key it will be a small "bar", the so called "deep dish"; curved design is no longer available. - keycap material will be POM - MOQ will be 1k units because in both cases it will be a custom version - G80-3000 series is manufactured in our CZ facility, membrane keyboards are produced in Auerbach-Germany - Logo will be lasered on the top right hand side which is Cherry standard. Please advise which model you chose. regards Raymond Chan 简单讲：我们之前不是有九大要求吗？加上ENTER键一共十个 这还是放弃了2 shot key（二色成形）之後的协调 不过我现在跟大家说 他只能给这些规格： 1.黑色... （okay...不过这一点很基本） 2.按键为茶轴的MX1A-G1JW (okay...不过大家都知道这点没有我也不想要) 3.雷射刻字（非两色成形） (Okay...不过大家都知道这是让步後的结果） (之前他也跟我说二色成形完全不可能) 4.US104键配置，无中文注音 (Okay...不过这点也很基本) 5.USB介面 (Okay...这点虽基本，就算是他帮我争取到的) 6.4 USB Port (No.....完全没有办法) 7.F、J两键弧形定位(deep dish) (No.....还跟我说已经不再使用了) 8.PBT材质按键 (这点最让我觉得奇怪，POM是哪种材质啊？) (况且他之前在电话上答应我是可以PBT材质的) 9.CHERRY LOGO (要放在右手边的上面) 10.ENTER键 (没说...根本没提到) 11.德国制造 (No..这个他真的在电话上答应我的，後来就改成捷克) 12.特殊型号 (应该算有给吧G80-3000LUNUS-2，不过这是加分用的) 於是以上12点中，除了一些他原本就答应我的之外 （不过那些都算是很基本的吧） 其他6.7.8.9.都给我乱七八糟 11.也是讲过当空气 最夸张的是，这样的规格开给我 还跟我说是客制化了 还要我MOQ（最低规格） 一千把键盘 所以我收到信後的心情不太好 我想大家可以理解吧...-__- 先报告到这边噜... --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 140.119.51.23 ※ 编辑: windmoonland 来自: 218.166.242.195 (04/08 15:58)