VMware Workstation 跳出memory錯誤 強制關閉虛擬主機 cpu:I5-2400 記憶體:12G 硬碟1T C:剩129/總199 虛擬設定 記憶體:2G/4G 硬碟 60G 在運作VM時會隨機性跳出錯誤 如下圖 http://i.imgur.com/TscFAZd.jpg http://i.imgur.com/pJFL5SL.jpg 目前是重灌主機&用最新版VM9.0.2註冊&建立虛擬主機 但還是會隨機性跳出(就算單純開機掛網也會隨機跳出) http://tinyurl.com/7udzty8 上面文中提到的 To resolve this issue, decrease the memory assigned to each virtual machine, increase the amount of physical memory installed in the host, or both. 這句是指要我減少VM內的公給記憶體或是增加實機的記憶體容量嗎? 另外上面中連結提到 After installing Windows 7 SP1, VMware Workstation reports the error: Not enough physical memory is available to power this virtual machine (1036185). http://tinyurl.com/d5ht6ls Not enough physical memory is available to power this virtual machine with its configured settings 這是指我的電源無法供應足夠的電給虛擬主機? In the vmware.log file, you see entries similar to: vmx| VerificationOfHostParameters status 2 vmx| Failed to verify host parameters 我去看我履歷他是說 2013-03-29T21:31:31.233+08:00| vmx| I120: VerificationOfHostParameters status 0 Resolution部分 After installing Windows 7 SP1 or Windows 2008 R2 SP1 on a 64bit host, you may experience this issue while trying to start a virtual machine. This issue is resolved by Workstation 7.1.4. You can download the latest version of Workstation from our Download Center. 這是說我安裝了Windows 7 SP1所以會出現的錯誤?此外Workstation 7.1.4這是指要我回 去載舊版7.1.4版本? 2個解決方法 1.You can resolve this issue by uninstalling SP1. For more information, see How to uninstall Windows 7 Service Pack 1 (SP1) . Note: The preceding links were correct as of March 22, 2011. If you find the link is broken, provide feedback and a VMware employee will update the link. 但是我主機並沒有安裝Windows 7 Service Pack 1 (SP1) (KB976932) 2.To workaround this issue, you can add a setting to the config file to restrict Workstation to using a percentage of the host's available RAM: Shut down all running virtual machines and exit Workstation. Open the config.ini file located at C:ProgramDataVMwareVMware Workstation. Add this line to the file: vmmon.disableHostParameters = TRUE Save and close the file. Restart Windows. This ensures that the virtual machine uses only 75% of the host memory. 我照他在C:Program Files (x86)VMwareVMware Workstation 建立文件檔 config.ini 內文vmmon.disableHostParameters = TRUE 但還是會跳出錯誤強制關閉虛擬機 是我哪裡設錯了嗎? --

※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 36.229.172.174