今天買了材料自己做好了JTAG interface了 http://www.wretch.cc/album/show.php?i=yuukikaze&b=6&f=1128883363&p=41 比原作者的還要漂亮http://www.atomboost.com/toshiba_linux/e740_jtag.png 哈哈... 問題是...我不會用Linux啊 囧rz 有沒有人懂下面這堆東西啊....如果我現在裝Linux有沒有辦法快速入門啊...嗚嗚嗚 Once you have connected the lead, you need to run bsrflash to replace the data you lost from your PDA. You can get a copy from handhelds.org CVS. export CVSROOT=:pserver:[email protected]:/cvs cvs login cvs co debrick You probably only need to replace the bootloader, but even if you erased the OS too, dont worry - once you have replaced the bootloader, you can use it to replace the OS without using JTAG any more (May not be true for all PDAs). Simply take the first 256KB of the ROM image, and flash this using bsrflash: (This can take a very long time). You will need (on e7xx at least) to unlock the flash first, which is shown in the instructions below. dd if=rom_image.bin of=wince_bootloader_img.bin bs=262144 count=1 bsrflash u bsrflash p wince_bootloader_img.bin You should verify the image after flashing it: bsrflash v wince_bootloader_img.bin Once you have flashed the unit successfully, turn off the main power switch (the small white one at the bottom) and then turn it back on. You should see the bootloader pop up within 5 seconds or so. If not, and the flash verified ok, you may have another problem. --

※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 163.25.118.32