作者sophiacccc (simple beauty)
看板NTUNL
標題[問題] 兩個Router接同一條網路
時間Fri Oct 29 01:52:27 2010
請教一下各位，因為我家四樓有五個人要用網路
可是Dlink的Router只有四個孔，剛好從國外帶回多一個Dlink router
所以我打算用兩個router接同一個HomeNetwork
http://compnetworking.about.com/od/routers/f/two_routers.htm
前面的都沒問題，就以下這兩點技術上是不是能指導一下?
2. Check / change IP address - Most home network routers use a default IP
address setting. Often, these default IP addresses will not work in a two
router environment.
Check the second router's IP address value and reset it
if necessary to work within the valid address range of the first router (and
to not conflict with any other device on the network).
Google到 Dlink Router IP: 192.168.0.1
不過請問一下黃線的地方要怎麼化作實際步驟操作?
講得好像有點籠統? 還是就是以下所指示的?
3. Disable DHCP - To avoid IP address conflicts between all of the devices on
the home network, only one of your two routers should assign addresses via
DHCP. All mainstream routers provide an option to disable DHCP as part of the
router's configuration screens.
然後，應該是到 Router IP address 後就會有畫面選項出現吧?
(￣▽￣＃)﹏﹏ 明天要去樓下設Router，如果有高手有經驗，拜託指點一下。
如果明天有操作上的錯誤或問題，可否再問一下? 抱歉占用版面了 = =||
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 114.36.49.68
※ 編輯: sophiacccc 來自: 114.36.49.68 (10/29 01:52)
1F：→ sophiacccc:我爸媽跟我弟都是電腦白痴...我雖然爆弱但是還是我家 10/29 01:54
2F：→ sophiacccc:最強的 XD 不好意思了= = 如有不妥請版主刪文 10/29 02:03
3F：→ sophiacccc:& 我現在非常無奈的是...還是有駭客入侵我的電腦 ~"~ 10/29 02:05