課程名稱︰分析化學丁 課程性質︰藥學系 醫學檢驗暨生物技術學系 必修 課程教師︰張煥宗 開課學院：理學院 開課系所︰化學系 考試日期（年月日）︰March 26, 2014 考試時限（分鐘）： 180分鐘 是否需發放獎勵金： 是 （如未明確表示，則不予發放） 試題 : I. Comparison: (1) Qualitative analysis and quantitative analysis (2) Analyte and matrix (3) Sensitivity and limit of detection (4) Fluorescence and phosphorescence (5) Absorption filters and Interference filters (6) Prism and grating (7) Photodiode and phototube (II) Buffer: (1) Under what conditions, the buffer bears a good buffer capacity? (2) How can you prepare a 1000 mL of 0.1 M tris buffer, pH 7.6 (pKa = 8.075, M.W. = 157.596 and 121.135 g/mol for tris hydrochloride and tris, respectively.)? ([tris] + [tris+] = 0.1 M) (3) Give an example to show the importance of a buffer. (III) Acid and base: A 100 mL of 0.1 M NaA (pKa of HA = 4.00) was titrated with 0.05 M HCl. (1) What are the pH values of 0.1 M NaA solutions after adding 0.05 M HCl solution at V = (a) 50 and (b) 100 mL? (2) What is the pKa range of a suitable indictor for the titration? (3) What is the concentration of HA after adding the HCl solution at V = 150 mL? (4) What is the concentration of A- when 0.1 mole of NaA is dissolved in a solution buffered to pH 5.0? (IV) Solubility: Calculate the solubility values of AgCl (Ksp = 10^-11) in (a) water and (b) 0.5 M NH3 if the formation constant for [Ag(NH3)2]+ is 10^8. (V) Absorption: (1) Define the Beer's law? You must give an equation and clearly define all the parameters. (2) A scheme for a single-beam UV-vis spectrophotometer. (3) What is the most popular UV light source used in absorption spectrometers? (4) Why is a PMT more useful to improve sensitivity in fluorescence than in absorption? (5) How does stray light affect the absorbance? (6) How does the intensity of a light source affect sensitivity? (7) Why is it important to measure absorption at the wavelength of maximum absorption? (VI) Calculation: (1) An echellete grating that contains 1500 blazes/mm was irradiated with a polychromatic beam at an incident angle of 30°to the grating normal. Calculate the wavelengths of radiation that would appear at an angle of reflection of 40°. (2) Calculate the molar absorptivity of a solution containing 0.1 mM KMnO4 that exhibits 50 %T in a 1.00-cm cell at 520 nm. (3) Calculate the concentration of Pd(II) ions in a mixture containing PdL2 and AuL2 complexes that has an absorbance of 0.5 at 480 nm and of 0.59 at 635nm. The molar absorptivity values (L mol^-1 cm^-1) at 480 and 635 nm for PdL2 complex are 3500 and 550, respectively, while those for AuL2 complex are 3000 and 15000, respectively. (VII) Standard addition method: (1) In what conditions, a standard addition method is required? (2) Why do the spiked amounts of a standard have to be close to the analyte concentration in an unhnown sample when applying a standard addition method? (3) How can you determine the concentration of an analyte in the unknown sample? (VIII) Methodology: (1) Suggest a spectrophotometric method for the determination of the dissociation constant of an acid. (2) Suggest a spectrophotometric method to determine the concentrations of Ti(IV) and Cu(II) in an aqueous solution containing the two metal ions. (3) Suggest a spectrophotometric method to determine the concentrations of Fe(II). (IX) Drug analysis --

※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 123.241.32.165 ※ 文章網址: http://webptt.com/m.aspx?n=bbs/NTU-Exam/M.1404284861.A.252.html ※ 編輯: yungye (123.241.32.165), 07/07/2014 17:52:53