※ 引述《PanJC ((#‵Д′)f〒﹌﹌﹌﹌﹌ꄩ》之銘言： : 各位好!我的OS是ubuntu最近想用cwtex,我依照此篇 : http://ftp.ntu.edu.tw/cwtex/cwTeX-Linux/ : 的readme進行安裝. 在我下載完四個檔案後下指令 ./allsetup 卻告訴我 : 拒絕不符權限的操作. : 在我改換為root身份後再輸入 ./allsetup 還是告訴我拒絕不符權限的操作. : 可否請有經驗的人告訴我是哪出了問題? : 謝謝! 經過一天的測試後,我參照以下網站的做法己經可以灌cwtex至ubuntu http://notebuntu.blogspot.com/2009/02/ubuntu-cwtex-big5.html 但在編譯的過程中還是出現了問題,po上版來請教有經驗的老手 編譯過程如下 ############################################################### 當我以cwtex編譯1.ctx檔時,出現以下的結果(可產出tex檔) ############################################################### The Preprocessor of cwTeX, Version 16.3g (emTeX, teTeX, MikTeX, & fpTeX). Copyright (C) 2002 By Wu T.M. & Wu T.H. All Rights Reserved. Linux Version 01 20001.7.1. Source code: cwtex8.c based on Kpathsea searching library This is cwTeX preprocessor, version 16.3g. **1.ctx (1.ctx [5]) Output written on 1.ctx.tex & cinput.tex. Transcript written on 1.ctx.xlg. ####################################################### 以latex編譯1.ctx.tex檔時,出現以下結困(可產出dvi檔) ####################################################### This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6) %&-line parsing enabled. entering extended mode (./1.ctx.tex LaTeX2e <2005/12/01> Babel <v3.8h> and hyphenation patterns for english, usenglishmax, dumylang, noh yphenation, croatian, ukrainian, russian, bulgarian, czech, slovak, danish, dut ch, finnish, basque, french, german, ngerman, ibycus, greek, monogreek, ancient greek, hungarian, italian, latin, mongolian, norsk, icelandic, interlingua, tur kish, coptic, romanian, welsh, serbian, slovenian, estonian, esperanto, upperso rbian, indonesian, polish, portuguese, spanish, catalan, galician, swedish, pin yin, loaded. (./cinput.tex) (/usr/share/texmf-texlive/tex/latex/base/article.cls Document Class: article 2005/09/16 v1.4f Standard LaTeX document class (/usr/share/texmf-texlive/tex/latex/base/size12.clo)) (./1.ctx.aux) (/usr/share/texmf/tex/latex/cwtex/OT1cwM0.fd) (/usr/share/texmf/tex/latex/cwtex/OT1cwM1.fd) (/usr/share/texmf/tex/latex/cwtex/OT1cwM2.fd) [1] (./1.ctx.aux) ) Output written on 1.ctx.dvi (1 page, 332 bytes). Transcript written on 1.ctx.log. ###################################################### 再來是以dvips編譯成ps,這步驟就明顯地出現問題了 ###################################################### This is dvips(k) 5.96.1 Copyright 2007 Radical Eye Software (www.radicaleye.com) ' TeX output 2009.08.23:2306' -> 1.ctx.ps kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+120/600 --dpi 720 m0 mktexpk: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1+120/600; nonstopmode; input m0 This is METAFONT, Version 2.71828 (Web2C 7.5.6) (/home/panjc/.texmf-var/fonts/source/cwtex/m0.mf (/usr/share/texmf-texlive/fonts/source/public/levy/m.mf >> readfrom ! Isolated expression. <to be read again> ( l.1 if unknown gen_sigma : readfrom( "gen_sigma") fi ! Extra tokens will be flushed. <to be read again> ( l.1 if unknown gen_sigma : readfrom( "gen_sigma") fi >> cmchar ! Isolated expression. <to be read again> "Lowercase mu" l.41 cmchar "Lowercase mu" ; ! Extra tokens will be flushed. <to be read again> "Lowercase mu" l.41 cmchar "Lowercase mu" ; ! Missing argument to beginchar. <to be read again> ; l.42 beginchar("m",dims); ! Missing argument to beginchar. <to be read again> ; l.42 beginchar("m",dims); >> dims ! Internal quantity `charwd' must receive a known value. <to be read again> ; beginchar->...byte(EXPR0)else:0fi;charwd:=(EXPR1); charht:=(EXPR2);chardp:=(E... <to be read again> ; l.42 beginchar("m",dims); >> this_letter ! Isolated expression. <to be read again> ; l.43 this_letter; penlabels(1,2,3,4,5,6,7,8,9,10,11); endchar; [109] mf: Window support for X was not compiled into this binary. mf: There may be a binary called `mfw' on your system which mf: does contain X window support. mf: If you need to recompile, remember to give the --with-x mf: option to configure mf: (Or perhaps you just failed to specify the mode.) >> cmchar ! Isolated expression. <to be read again> "Lowercase sigma followed by mu" l.47 cmchar "Lowercase sigma followed by mu" ; ! Extra tokens will be flushed. <to be read again> "Lowercase sigma followed by mu" l.47 cmchar "Lowercase sigma followed by mu" ; >> begindoublechar ! Isolated expression. <to be read again> ( l.48 begindoublechar( oct"015",dim_sigma); ! Extra tokens will be flushed. <to be read again> ( l.48 begindoublechar( oct"015",dim_sigma); >> mid_sigma ! Isolated expression. <to be read again> ; l.49 mid_sigma; middoublechar(dims); this_letter; endchar; >> middoublechar ! Isolated expression. <to be read again> ( l.49 mid_sigma; middoublechar( dims); this_letter; endchar; ! Extra tokens will be flushed. <to be read again> ( l.49 mid_sigma; middoublechar( dims); this_letter; endchar; >> this_letter ! Isolated expression. <to be read again> ; l.49 mid_sigma; middoublechar(dims); this_letter; endchar; [109] ! Extra `endgroup'. endchar->...makebox(screenrule);showit;fi.endgroup l.49 ... middoublechar(dims); this_letter; endchar ; )) ! Emergency stop. <*> ...four; mag:=1+120/600; nonstopmode; input m0 Output written on m0.2602gf (2 characters, 392 bytes). Transcript written on m0.log. mktexpk: `mf-nowin -progname=mf \mode:=ljfour; mag:=1+120/600; nonstopmode; input m0' failed. kpathsea: Appending font creation commands to missfont.log. dvips: Font m0 not found, using cmr10 instead. </home/panjc/.texmf-var/fonts/pk/ljfour/public/cm/cmr10.720pk> dvips: Checksum mismatch in font m0 kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+120/600 --dpi 720 m1 mktexpk: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1+120/600; nonstopmode; input m1 This is METAFONT, Version 2.71828 (Web2C 7.5.6) (/home/panjc/.texmf-var/fonts/source/cwtex/m1.mf (/usr/share/texmf-texlive/fonts/source/public/levy/m.mf >> readfrom ! Isolated expression. <to be read again> ( l.1 if unknown gen_sigma : readfrom( "gen_sigma") fi ! Extra tokens will be flushed. <to be read again> ( l.1 if unknown gen_sigma : readfrom( "gen_sigma") fi >> cmchar ! Isolated expression. <to be read again> "Lowercase mu" l.41 cmchar "Lowercase mu" ; ! Extra tokens will be flushed. <to be read again> "Lowercase mu" l.41 cmchar "Lowercase mu" ; ! Missing argument to beginchar. <to be read again> ; l.42 beginchar("m",dims); ! Missing argument to beginchar. <to be read again> ; l.42 beginchar("m",dims); >> dims ! Internal quantity `charwd' must receive a known value. <to be read again> ; beginchar->...byte(EXPR0)else:0fi;charwd:=(EXPR1); charht:=(EXPR2);chardp:=(E... <to be read again> ; l.42 beginchar("m",dims); >> this_letter ! Isolated expression. <to be read again> ; l.43 this_letter; penlabels(1,2,3,4,5,6,7,8,9,10,11); endchar; [109] mf: Window support for X was not compiled into this binary. mf: There may be a binary called `mfw' on your system which mf: does contain X window support. mf: If you need to recompile, remember to give the --with-x mf: option to configure mf: (Or perhaps you just failed to specify the mode.) >> cmchar ! Isolated expression. <to be read again> "Lowercase sigma followed by mu" l.47 cmchar "Lowercase sigma followed by mu" ; ! Extra tokens will be flushed. <to be read again> "Lowercase sigma followed by mu" l.47 cmchar "Lowercase sigma followed by mu" ; >> begindoublechar ! Isolated expression. <to be read again> ( l.48 begindoublechar( oct"015",dim_sigma); ! Extra tokens will be flushed. <to be read again> ( l.48 begindoublechar( oct"015",dim_sigma); >> mid_sigma ! Isolated expression. <to be read again> ; l.49 mid_sigma; middoublechar(dims); this_letter; endchar; >> middoublechar ! Isolated expression. <to be read again> ( l.49 mid_sigma; middoublechar( dims); this_letter; endchar; ! Extra tokens will be flushed. <to be read again> ( l.49 mid_sigma; middoublechar( dims); this_letter; endchar; >> this_letter ! Isolated expression. <to be read again> ; l.49 mid_sigma; middoublechar(dims); this_letter; endchar; [109] ! Extra `endgroup'. endchar->...makebox(screenrule);showit;fi.endgroup l.49 ... middoublechar(dims); this_letter; endchar ; )) ! Emergency stop. <*> ...four; mag:=1+120/600; nonstopmode; input m1 Output written on m1.2602gf (2 characters, 392 bytes). Transcript written on m1.log. mktexpk: `mf-nowin -progname=mf \mode:=ljfour; mag:=1+120/600; nonstopmode; input m1' failed. dvips: Font m1 not found, using cmr10 instead. </home/panjc/.texmf-var/fonts/pk/ljfour/public/cm/cmr10.720pk> dvips: Checksum mismatch in font m1 kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+120/600 --dpi 720 m2 mktexpk: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1+120/600; nonstopmode; input m2 This is METAFONT, Version 2.71828 (Web2C 7.5.6) (/home/panjc/.texmf-var/fonts/source/cwtex/m2.mf (/usr/share/texmf-texlive/fonts/source/public/levy/m.mf >> readfrom ! Isolated expression. <to be read again> ( l.1 if unknown gen_sigma : readfrom( "gen_sigma") fi ! Extra tokens will be flushed. <to be read again> ( l.1 if unknown gen_sigma : readfrom( "gen_sigma") fi >> cmchar ! Isolated expression. <to be read again> "Lowercase mu" l.41 cmchar "Lowercase mu" ; ! Extra tokens will be flushed. <to be read again> "Lowercase mu" l.41 cmchar "Lowercase mu" ; ! Missing argument to beginchar. <to be read again> ; l.42 beginchar("m",dims); ! Missing argument to beginchar. <to be read again> ; l.42 beginchar("m",dims); >> dims ! Internal quantity `charwd' must receive a known value. <to be read again> ; beginchar->...byte(EXPR0)else:0fi;charwd:=(EXPR1); charht:=(EXPR2);chardp:=(E... <to be read again> ; l.42 beginchar("m",dims); >> this_letter ! Isolated expression. <to be read again> ; l.43 this_letter; penlabels(1,2,3,4,5,6,7,8,9,10,11); endchar; [109] mf: Window support for X was not compiled into this binary. mf: There may be a binary called `mfw' on your system which mf: does contain X window support. mf: If you need to recompile, remember to give the --with-x mf: option to configure mf: (Or perhaps you just failed to specify the mode.) >> cmchar ! Isolated expression. <to be read again> "Lowercase sigma followed by mu" l.47 cmchar "Lowercase sigma followed by mu" ; ! Extra tokens will be flushed. <to be read again> "Lowercase sigma followed by mu" l.47 cmchar "Lowercase sigma followed by mu" ; >> begindoublechar ! Isolated expression. <to be read again> ( l.48 begindoublechar( oct"015",dim_sigma); ! Extra tokens will be flushed. <to be read again> ( l.48 begindoublechar( oct"015",dim_sigma); >> mid_sigma ! Isolated expression. <to be read again> ; l.49 mid_sigma; middoublechar(dims); this_letter; endchar; >> middoublechar ! Isolated expression. <to be read again> ( l.49 mid_sigma; middoublechar( dims); this_letter; endchar; ! Extra tokens will be flushed. <to be read again> ( l.49 mid_sigma; middoublechar( dims); this_letter; endchar; >> this_letter ! Isolated expression. <to be read again> ; l.49 mid_sigma; middoublechar(dims); this_letter; endchar; [109] ! Extra `endgroup'. endchar->...makebox(screenrule);showit;fi.endgroup l.49 ... middoublechar(dims); this_letter; endchar ; )) ! Emergency stop. <*> ...four; mag:=1+120/600; nonstopmode; input m2 Output written on m2.2602gf (2 characters, 392 bytes). Transcript written on m2.log. mktexpk: `mf-nowin -progname=mf \mode:=ljfour; mag:=1+120/600; nonstopmode; input m2' failed. dvips: Font m2 not found, using cmr10 instead. </home/panjc/.texmf-var/fonts/pk/ljfour/public/cm/cmr10.720pk> dvips: Checksum mismatch in font m2 dvips: ! invalid char 182 from font m2 ----------------------------------------------------------------------- 己經玩了一天了,請各位幫幫忙,謝謝~ --

※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 124.8.14.35