作者IEE (阿呆)
看板LaTeX
標題[問題] bibtex 後的*.bbl
時間Sat Jul 4 00:29:10 2009
大家好, 小弟參考元智大學提供的LaTeX範例(V2.0)作為練習用
在參考文獻部份
\newpage
\addcontentsline{toc}{chapter}{\nameRef}
\renewcommand{\bibname}{\protect\makebox[5cm][s]{\nameRef}}
\bibliographystyle{IEEEtran} % 使用 IEEE Trans 期刊格式
\bibliography{my_bib.bib}
my_bib.bib
@article{jap_093_1108_2003_kondakov,
Author = {Kondakov, D. Y. and Sandifer, J. R. and Tang, C. W. and Young, R. H.},
Journal = {J. Appl. Phys.},
Keywords = {OLED},
Local-Url = {/Users/Shared/Bib/pdf collections/OLED/JAP_093_1108_2003_kondakov.pdf},
Title = {Nonradiative recombination centers and electrical aging of organic light-emitting diodes: Direct connection between accumulation of trapped charge and luminance loss},
Volume = {93},
Year = {2003}}
執行bibtex後的 .bbl檔
% Generated by IEEEtran.bst, version: 1.13 (2008/09/30)
\begin{thebibliography}{1}
\providecommand{\url}[1]{#1}
\csname url@samestyle\endcsname
\providecommand{\newblock}{\relax}
\providecommand{\bibinfo}[2]{#2}
\providecommand{\BIBentrySTDinterwordspacing}{\spaceskip=0pt\relax}
\providecommand{\BIBentryALTinterwordstretchfactor}{4}
\providecommand{\BIBentryALTinterwordspacing}{\spaceskip=\fontdimen2\font plus
\BIBentryALTinterwordstretchfactor\fontdimen3\font minus
\fontdimen4\font\relax}
\providecommand{\BIBforeignlanguage}[2]{{%
\expandafter\ifx\csname l@#1\endcsname\relax
\typeout{** WARNING: IEEEtran.bst: No hyphenation pattern has been}%
\typeout{** loaded for the language `#1'. Using the pattern for}%
\typeout{** the default language instead.}%
\else
\language=\csname l@#1\endcsname
\fi
#2}}
\providecommand{\BIBdecl}{\relax}
\BIBdecl
\bibitem{jap_093_1108_2003_kondakov}
D.~Y. Kondakov, J.~R. Sandifer, C.~W. Tang, and R.~H. Young, ``Nonradiative
recombination centers and electrical aging of organic light-emitting diodes:
Direct connection between accumulation of trapped charge and luminance
loss,'' \emph{J. Appl. Phys.}, vol.~93, 2003.
\end{thebibliography}
其中倒數第三行的 \emph{J. Appl. Phys.} 在pdf上顯示的就是journal名稱+底線
但是範例出來的.bbl卻是 {\em J. Appl. Phys.} 所以是斜體
我想採用斜體的方式, 不知道哪裡有出了問題 @@?
(小弟剛使用LaTeX不久, 找了老半天也不知道是怎麼一回事 冏)
麻煩各位高手提醒了 ~感謝~
已解決：
(參考李老師曾經提過的回答, http://bbs2.nchu.edu.tw:8000/brdmost/tex&103)
將 \usepackage{ulem} --> \usepackage[normalem]{ulem} 即可.
在此提供給遇到類似問題的人參考～～
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 140.114.14.9
※ 編輯: IEE 來自: 140.114.14.9 (07/05 19:54)
※ 編輯: IEE 來自: 140.114.14.9 (07/05 20:05)
※ 編輯: IEE 來自: 140.114.14.9 (07/05 20:09)