==> [email protected] (敬請期待 :P) 提到: : ※ 引述《[email protected] (SWD)》之銘言： : : 請問一下 , 有沒有人跟我碰過一樣的問題 , 我的網路卡介面 : : sk0 , telnet 不會有問題 , 但只要用 ftp 大量傳資料後 , : : sk0 就會死掉，從開機後才會恢復 , 不曉得有沒有人碰過跟我一樣的問題 ? : : SWD : 你是不是有 SMP (包括開 HTT?) : 有的話, 用這個: : sudo echo "debug.mpsafenet=0" >> /boot/loader.conf : sudo reboot 不知道ㄝ .. 5.3 版預設安裝 , 華碩主機板 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.10.10.205 netmask 0xffffff00 broadcast 10.10.10.255 inet6 fe80::211:2fff:febd:f7a2%sk0 prefixlen 64 scopeid 0x1 ether 00:11:2f:bd:f7:a2 media: Ethernet autoselect (100baseTX <full-duplex>) status: active ============ Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Sat Aug 6 10:06:07 CST 2005 [email protected]:/usr/src/sys/i386/compile/mst Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3006.83-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 536543232 (511 MB) avail memory = 515371008 (491 MB) ACPI APIC Table: <A M I OEMAPIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 o n pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_F OUND pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc480-0xc49f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc800-0xc81f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc880-0xc89f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xcc00-0xcc1f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 skc0: <Marvell Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbffc000-0xfbffffff ir q 22 at device 5.0 on pci2 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:11:2f:bd:f7:a2 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto ff irq 22 at device 10.0 on pci2 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:50:ba:ab:fe:3a isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x 3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <multimedia, audio> at device 31.5 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi 0 fdc0: [FAST] ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on ac pi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 3006832073 Hz quality 800 Timecounters tick every 10.000 msec ad0: 76319MB <ST380011A/3.06> [155061/16/63] at ata0-master UDMA100 acd0: CDROM <ASUS CD-S520/A5/1.1> at ata1-slave UDMA33 Mounting root from ufs:/dev/ad0s1a -- ◎龍貓資訊天地(bbs.mgt.ncu.edu.tw) ◎[SWD]From: 218-168-240-231.dynamic.hinet.net