# snmpd.conf #### # First, map the community name "public" into a "security name" # sec.name source community com2sec local localhost public com2sec mynetwork 192.168.1.0/24 public #### # Second, map the security name into a group name: # groupName securityModel securityName group MyRWGroup v1 local group MyROGroup v1 mynetwork #### # Third, create a view for us to let the group have rights to: # name incl/excl subtree mask(optional) view all included .1 80 #### # Finally, grant the group read-only access to the systemview view. # group context sec.model sec.level prefix read write notif access MyRWGroup "" any noauth exact all all none access MyROGroup "" any noauth exact all none none ############################################################################ ### # System contact information # # It is also possible to set the sysContact and sysLocation system # variables through the snmpd.conf file: sysLocation xxx sysContact Root <[email protected]> -- 我是放在 /usr/local/etc/snmp/snmpd.conf 測試指令 # snmpwalk -v 1 localhost public system system.sysDescr.0 = "SunOS name sun4c" system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4 system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55 system.sysContact.0 = "Me <[email protected]>" system.sysName.0 = "name" system.sysLocation.0 = "Right here, right now." system.sysServices.0 = 72 .. .. 有看到一堆訊息那就ok了! "☆ 月光仙子 ☆" <[email protected]> 在郵件 news:[email protected] 中撰寫... ※ 引述《[email protected] (妙音)》之銘言： : 【 在 [email protected] (淡淡的藍色) 的大作中提到: 】 : : 檢查看看snmpd.conf是否有設定對…會不會漏掉沒設定到 : 安裝好之後, 好像沒有預設的 snmpd.conf : 不管是 /usr/local/etc/snmp 或是 /usr/local/share/snmp : 都沒有看到 : 請問, 應該如何設定呢? : (請不要只教我 man snmpd.conf, 我對 snmp 不熟, 已經看得一頭霧水) : 謝謝 自己建一個 snmpd.conf 在/usr/local/share/snmp 應該只要加上 rocommunity XXXXX 這行就可以跑mrtg -- 最近灌一台是這樣做.... -- ※ Origin: 中原電機心站 ◆ From: student.ee.cycu.edu.tw -- Origin: 中原電機心站 bbs.ee.cycu.edu.tw (140.135.12.1)