看板FreeBSD
標 題Re: 新手請教 ide raid 的安裝
發信站洗屁屁小站 (Fri Apr 23 13:20:13 2004)
轉信站ptt!ctu-reader!ctu-peer!Spring!news.nctu!news.ntu!cpp
※ 引述《[email protected] (Hahaha)》之銘言：
> 能否請先進指點一下在Freebsd 下的 ide raid 該怎麼做比較好
> 有什麼建議的raid acrd 嗎？
> ※ 引述《"Hahaha" <[email protected]>》之銘言：
> > 手邊有一張 Promise TX2000 raid card. 想說試試在bsd 5.2.1上弄個raid 1
> > 試了好久都不成功，想請教有經驗的大大，到底該怎麼做？
> > 在freebsd網頁找到以下這段話
> > 12.4.2 Hardware RAID
> > FreeBSD also supports a variety of hardware RAID controllers. These devices control a RAID subsystem without the need for FreeBSD specific software to manage the array.
> > Using an on-card BIOS, the card controls most of the disk operations itself. The following is a brief setup description using a Promise IDE RAID controller. When this card is installed and the system is started up, it displays a prompt
requestin
> g information. Follow the instructions to enter the card's setup screen. From here, you have the ability to combine all the attached drives. After doing so, the disk(s) will look like a single drive to FreeBSD. Other RAID levels can be s
et up acco
> rdingly.
> > 但我安裝bsd時系統找到三顆硬碟 ad4 ad6 與ar0 裝在任一顆都有錯
> > 請問需要特別的driver才能安裝嗎？promise 並沒有提供 freebsd driver 能裝嗎？
我用過這張卡，sil 680晶片組的在FreeBSD 4.9-RELEASE下有支援。
我是參考HandBook上面的指南做出來的。
你不妨看看。
--
╭─ Origin ─╗ 洗屁屁小站 cpp.twbbs.org ～ ─────┼
├ Author ╡ 219.95.24.209