想看排版過的Script的可以參考我的weblog： http://kslman.blogspot.com/2010/08/autohotkeyosd.html ----------------------------------------------------------------------------- ※Windows XP適用。 Volume On-Screen-Display (OSD) -- by Rajat 可以調整音量，並用OSD的顯示方式來讓使用者知道目前音量的大小，對於沒有調整音量 的喇叭，或者是直接把耳機插在音效輸出孔上的使用者來說，可以說是相當方便的功能。 原始 Script 可以參考：http://www.autohotkey.com/docs/scripts/VolumeOSD.htm 不過原始 Script 如果直接放進自己常用的 Script 裡頭，可能會造成原本的 Script 失 效，而且不把 Script 放在最前面也可能會失效。（因為可能會和原本自己寫的 Script 衝突） 為了解決這個問題，我把 Script 稍微改了一下。（順便也把熱鍵修改成用滾輪） 只要在自己的 Script 中加入這一行： #include %A_ScriptDir%\volumeosd.ahk 然後把下面這段 Script 另存為 volumeosd.ahk，並存放到自己常用的 Script 資料夾下 就可以使用了囉。 ; If your keyboard has multimedia buttons for Volume, you can ; try changing the below hotkeys to use them by specifying ; Volume_Up, ^Volume_Up, Volume_Down, and ^Volume_Down: #WheelUp:: Gosub, volumeosdini Gosub, vol_MasterUp ;Win+WheelUp return #WheelDown:: Gosub, volumeosdini Gosub, vol_MasterDown ;Win+WheelDown return #+WheelUp:: Gosub, volumeosdini Gosub, vol_WaveUp ;Win+Shift+WheelUp return #+WheelDown:: Gosub, volumeosdini Gosub, vol_WaveDown ;Win+Shift+WheelDown return volumeosdini: ;_________________________________________________ ;_______User Settings_____________________________ ; Make customisation only in this area or hotkey area only!! ; The percentage by which to raise or lower the volume each time: vol_Step = 3 ; How long to display the volume level bar graphs: vol_DisplayTime = 1000 ; Master Volume Bar color (see the help file to use more ; precise shades): vol_CBM = Red ; Wave Volume Bar color vol_CBW = Blue ; Background color vol_CW = Silver ; Bar's screen position. Use -1 to center the bar in that dimension: vol_PosX = -1 vol_PosY = -1 vol_Width = 150 ; width of bar vol_Thick = 12 ; thickness of bar ;___________________________________________ ;_____Auto Execute Section__________________ ; DON'T CHANGE ANYTHING HERE (unless you know what you're doing). vol_BarOptionsMaster = 1:B ZH%vol_Thick% ZX0 ZY0 W%vol_Width% CB%vol_CBM% CW%vol_CW% vol_BarOptionsWave = 2:B ZH%vol_Thick% ZX0 ZY0 W%vol_Width% CB%vol_CBW% CW%vol_CW% ; If the X position has been specified, add it to the options. ; Otherwise, omit it to center the bar horizontally: if vol_PosX >= 0 { vol_BarOptionsMaster = %vol_BarOptionsMaster% X%vol_PosX% vol_BarOptionsWave = %vol_BarOptionsWave% X%vol_PosX% } ; If the Y position has been specified, add it to the options. ; Otherwise, omit it to have it calculated later: if vol_PosY >= 0 { vol_BarOptionsMaster = %vol_BarOptionsMaster% Y%vol_PosY% vol_PosY_wave = %vol_PosY% vol_PosY_wave += %vol_Thick% vol_BarOptionsWave = %vol_BarOptionsWave% Y%vol_PosY_wave% } #SingleInstance SetBatchLines, 10ms Return ;___________________________________________ vol_WaveUp: SoundSet, +%vol_Step%, Wave Gosub, vol_ShowBars return vol_WaveDown: SoundSet, -%vol_Step%, Wave Gosub, vol_ShowBars return vol_MasterUp: SoundSet, +%vol_Step% Gosub, vol_ShowBars return vol_MasterDown: SoundSet, -%vol_Step% Gosub, vol_ShowBars return vol_ShowBars: ; To prevent the "flashing" effect, only create the bar window if it ; doesn't already exist: IfWinNotExist, vol_Wave Progress, %vol_BarOptionsWave%, , , vol_Wave IfWinNotExist, vol_Master { ; Calculate position here in case screen resolution changes while ; the script is running: if vol_PosY < 0 { ; Create the Wave bar just above the Master bar: WinGetPos, , vol_Wave_Posy, , , vol_Wave vol_Wave_Posy -= %vol_Thick% Progress, %vol_BarOptionsMaster% Y%vol_Wave_Posy%, , , vol_Master } else Progress, %vol_BarOptionsMaster%, , , vol_Master } ; Get both volumes in case the user or an external program changed them: SoundGet, vol_Master, Master SoundGet, vol_Wave, Wave Progress, 1:%vol_Master% Progress, 2:%vol_Wave% SetTimer, vol_BarOff, %vol_DisplayTime% return vol_BarOff: SetTimer, vol_BarOff, off Progress, 1:Off Progress, 2:Off return 以上是改自 Rajat 大大的 Script，不過我個人是習慣再加上靜音的功能，所以你也可以 把這一段加在 Script 裡頭。 #MButton:: ;windows+滑鼠中鍵，切換聲音/靜音 Send {Volume_Mute} return --

※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 122.147.6.242 ※ 編輯: kslman 來自: 219.91.75.161 (08/15 02:21)