各位大大~ 我才燒完一片且一切都正常, 沒想到開始燒下一片就一直出現問題... 接著就一直在製造飛盤了!! 不知道"無效的區塊位址"到底是什麼問題? 再把光碟放回去都有顯示我燒進去的東西, 只是都打不開檔案 (所以有等於沒有...) 想麻煩各位高手幫我看一下這錯誤訊息到底在說什麼呀~~~~~ 謝謝謝謝謝!!!! 1.燒錄機種(請PO型號)： ASUS DRW-1608P2 2.使用空片(請用CD/DVD SPEED來PO出光碟資訊)： 16X DVD-R片 3.燒錄速度： 6X 4.使用軟體(註明版本)： Nero 7.0.1.2 5.錯誤訊息或症狀詳述(可以的話請附上詳細過程)： Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/11/2 下午 12:54:32 NT-SPTI used Nero Version: 7.0.1.2Internal Version: 7, 0, 1, 2 (Nero Express) Recorder: <ASUS DRW-1608P2> Version: 1.17 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <PCI PL-25U2S >Version: 2.00 - HA 1 TA 3 - 7.0.1.2 Adapter driver: <USB> HA 1 === Scsi-Device-Map === CdRomPeripheral : ASUS DRW-1608P2 nvatabus Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD6400AAKS-00A7B2 nvatabus Port 2 ID 0 DMA: Off DiskPeripheral : ST3160812AS nvatabus Port 2 ID 2 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off === CDRom-Device-Map === ASUS DRW-1608P2 D: CDRom0 PCI PL-25U2S I: CDRom3 AXV CD/DVD-ROM J: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 256MB (262272kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.12.2009 ISO 編製 上午 01:32:16 #1 Text 0 File Isodoc.cpp, Line 6411 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 上午 01:32:17 #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 81920KB of Memory 上午 01:32:17 #3 Text 0 File Reader.cpp, Line 124 Reader running 上午 01:32:17 #4 Text 0 File Writer.cpp, Line 113 Writer D: ASUS DRW-1608P2 running 上午 01:32:17 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 上午 01:33:36 #6 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 上午 01:33:37 #7 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1769855 (393:18.05, 3456MB) 上午 01:33:37 #8 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 上午 01:33:37 #9 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: ASUS DRW-1608P2, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 上午 01:33:37 #10 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 上午 01:33:37 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1769856 (1769856) = #1769856/393:18.6 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1769856 blocks [D: ASUS DRW-1608P2] -------------------------------------------------------------- 上午 01:33:37 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: ASUS DRW-1608P2] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3624665088, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1769856 | lead-out | 1 | 0x41 | 0x00 上午 01:33:37 #13 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 上午 01:33:37 #14 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 上午 01:33:37 #15 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 上午 01:33:37 #16 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 上午 01:33:37 #17 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 6x (8,310 KB/s) 上午 01:33:38 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 上午 01:33:38 #19 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode for Multisession 上午 01:33:38 #20 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON 上午 01:33:38 #21 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 上午 01:33:38 #22 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 上午 01:33:40 #23 Text 0 File Cdrdrv.cpp, Line 1197 01:33:40.437 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #24 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.671 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #25 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.687 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #26 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.687 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #27 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.703 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #28 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.734 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #29 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.750 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #30 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.750 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #31 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.781 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #32 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.796 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #33 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.796 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #34 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.812 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #35 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.843 - D: ASUS DRW-1608P2 : Queue again later 上午 01:33:54 #36 Text 0 File Cdrdrv.cpp, Line 1197 01:33:54.984 - D: ASUS DRW-1608P2 : Queue again later 上午 01:34:04 #37 SPTI -1064 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 00 00 00 08 80 00 00 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02 Buffer x0df60000: Len x10000 0x21 70 55 D5 B9 56 53 D4 1A D6 56 71 70 46 9C D6 0x92 E5 E8 7E 7D FC 73 F8 7A 7E 06 7C 6B 2F A7 2B 0x7F C2 3B AD 13 73 6C 80 7C 88 18 FC EA 09 EE A4 上午 01:34:04 #38 CDR -1064 File Writer.cpp, Line 302 Invalid block address D: ASUS DRW-1608P2 上午 01:34:04 #39 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 上午 01:34:05 #40 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 上午 01:34:05 #41 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 2175 上午 01:34:05 #42 Phase 133 File dlgbrnst.cpp, Line 1725 Writing short lead-out 上午 01:41:52 #43 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 6x (8,310 KB/s) 如有好消息我會再來報告滴~ --

※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 122.124.97.228