comm_and_RF 板


LINE

module led_rat(clkin,reset,led); input clkin; input reset; output [7:0]led; reg [23:0]q; reg [7:0]led; reg div_clkout; reg flag; always@( posedge reset or negedge clkin) begin if(reset) begin div_clkout = 0; q = 0; end else if (q == 50000000) begin div_clkout = ~div_clkout; q = 0; end else q=q+1; end always@(posedge reset or negedge div_clkout) begin if(reset) begin led = 0; flag = 0; end else if (flag == 0) begin led = led << 1; flag = 1; end else if (flag == 1) begin led = led >> 1; flag = 0; end else led = led; end endmodule 这个程式主要是做除频+LED移位的功能 可是合成完之後,会找不到CLK的脚位 有大大可以帮我看一下吗?谢谢 以下是timing report TIMING REPORT NOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE. FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORT GENERATED AFTER PLACE-and-ROUTE. Clock Information: ------------------ No clock signals found in this design Asynchronous Control Signals Information: ---------------------------------------- No asynchronous control signals found in this design Timing Summary: --------------- Speed Grade: -5 Minimum period: No path found Minimum input arrival time before clock: No path found Maximum output required time after clock: No path found Maximum combinational path delay: 9.317ns Timing Detail: -------------- All values displayed in nanoseconds (ns) ========================================================================= Timing constraint: Default path analysis Total number of paths / destination ports: 6 / 3 ------------------------------------------------------------------------- Delay: 9.317ns (Levels of Logic = 4) Source: reset (PAD) Destination: led<3> (PAD) Data Path: reset to led<3> Gate Net Cell:in->out fanout Delay Delay Logical Name (Net Name) ---------------------------------------- ------------ IBUF:I->O 2 0.715 1.040 reset_IBUF (reset_IBUF) LUT2:I0->O 2 0.479 0.915 _n00001 (flag) LUT3:I1->O 4 0.479 0.779 led<1>1 (led_1_OBUF) OBUF:I->O 4.909 led_3_OBUF (led<3>) ---------------------------------------- Total 9.317ns (6.582ns logic, 2.735ns route) (70.6% logic, 29.4% route) ========================================================================= -- 当在跑向终点的漫长旅程上,请不要忘记最初起点的梦想! --



※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 220.133.46.8 ※ 编辑: finalhaven 来自: 220.133.46.8 (05/16 00:14)
1F:推 yyuto:你的CLK是设哪个参数 clkin? 61.64.235.177 05/16 00:37
2F:→ finalhaven:对呀~ 220.133.46.8 05/16 01:16







like.gif 您可能会有兴趣的文章
icon.png[问题/行为] 猫晚上进房间会不会有憋尿问题
icon.pngRe: [闲聊] 选了错误的女孩成为魔法少女 XDDDDDDDDDD
icon.png[正妹] 瑞典 一张
icon.png[心得] EMS高领长版毛衣.墨小楼MC1002
icon.png[分享] 丹龙隔热纸GE55+33+22
icon.png[问题] 清洗洗衣机
icon.png[寻物] 窗台下的空间
icon.png[闲聊] 双极の女神1 木魔爵
icon.png[售车] 新竹 1997 march 1297cc 白色 四门
icon.png[讨论] 能从照片感受到摄影者心情吗
icon.png[狂贺] 贺贺贺贺 贺!岛村卯月!总选举NO.1
icon.png[难过] 羡慕白皮肤的女生
icon.png阅读文章
icon.png[黑特]
icon.png[问题] SBK S1安装於安全帽位置
icon.png[分享] 旧woo100绝版开箱!!
icon.pngRe: [无言] 关於小包卫生纸
icon.png[开箱] E5-2683V3 RX480Strix 快睿C1 简单测试
icon.png[心得] 苍の海贼龙 地狱 执行者16PT
icon.png[售车] 1999年Virage iO 1.8EXi
icon.png[心得] 挑战33 LV10 狮子座pt solo
icon.png[闲聊] 手把手教你不被桶之新手主购教学
icon.png[分享] Civic Type R 量产版官方照无预警流出
icon.png[售车] Golf 4 2.0 银色 自排
icon.png[出售] Graco提篮汽座(有底座)2000元诚可议
icon.png[问题] 请问补牙材质掉了还能再补吗?(台中半年内
icon.png[问题] 44th 单曲 生写竟然都给重复的啊啊!
icon.png[心得] 华南红卡/icash 核卡
icon.png[问题] 拔牙矫正这样正常吗
icon.png[赠送] 老莫高业 初业 102年版
icon.png[情报] 三大行动支付 本季掀战火
icon.png[宝宝] 博客来Amos水蜡笔5/1特价五折
icon.pngRe: [心得] 新鲜人一些面试分享
icon.png[心得] 苍の海贼龙 地狱 麒麟25PT
icon.pngRe: [闲聊] (君の名は。雷慎入) 君名二创漫画翻译
icon.pngRe: [闲聊] OGN中场影片:失踪人口局 (英文字幕)
icon.png[问题] 台湾大哥大4G讯号差
icon.png[出售] [全国]全新千寻侘草LED灯, 水草

请输入看板名称,例如:iOS站内搜寻

TOP