※ [本文转录自 Electronics 看板] 作者: pinns (努力向上中...) 看板: Electronics 标题: [请益] HSPICE问题.. 时间: Thu Feb 22 18:28:22 2007 小弟有两个问题想请教各位高手... 1.以下是小地跑SPICE的时候 所出现的错误讯息.. 能否请高手指教一下,到底是什麽问题呢? 是不是收敛的问题...因为刚开始跑没多久 跑到一半 会当掉.. lis档如下.. _____________________________________ **error**: internal timestep too small in transient analysis time = 0.00000D+00; delta = 3.72529E-19; numnit = 112 **warning** no convergence, invoking autoconvergence ***** job aborted **warning** autoconvergence is invoked! trying method=gear from time=0 ***autoconvergence sets default value of the options: method= gear lvltim= 2 mbypass= 1.00 bypass= 0. bytol= 50.00u slopetol= 500.00m rmax= 2.00 **diagnostic** dc convergence failure, resetting dcon option to 1 and retrying **diagnostic** dc convergence failure, resetting dcon option to 2 and retrying. no convergence with standard algorithm, trying damped pseudo-transient **diagnostic** number of iteration exceeds min(7000, 20*itl1)= 4000 in pseudo tran process (converge=1 process). Usually this happens when the models are discontinous, or there are uninitialized bi-stable cells (flip-flop) in the circuit. By setting options dcon=-1 and converge=-1 you can disable auto convergence process. Retry the run, non-convergence diagnostics will provide useful information about the nodes and devices which can be used to work around the non-convergence problems. no convergence in damped pseudo-transient, trying gmath ramping method **diagnostic** op convergence successful with gmath ramping method **warning** This was a difficult operating point. You can speed up your simulation by specifying: .OPTION CONVERGE=4 Opening plot unit= 79 file=c:\flexlm\comp(dc).tr1 _________________________________________ 问题2. 小弟在跑比较器的电路 请问高手 怎麽跑出出 迟滞曲线呢?? 要使用.dc 还是.tran跑呢?? 怎麽跑呢 能否请高手指教 ... 拜托了 请指教... --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 203.68.223.110 ※ 编辑: pinns 来自: 203.68.223.110 (02/22 18:31) --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 218.168.194.193