作者csmao (Creeping Death)
看板comm_and_RF
标题Re: [问题] 802.16的QoS表
时间Sun Jun 11 01:00:33 2006
※ 引述《saap (saap)》之铭言：
: 请教各位网友，
: 在802.16-2004 Std中提到某一service flow的AdmittedQosParaSet有值，
: 但ActiveQoSParaSet设为0，
: 因此小弟认为在BS中有两个Table分别存放这两种Qos的参数，
: 但是文中却又未明确提到其有两种表，
: 因此想请教这两种Qos参数到底是怎麽回事呢?
Actually, there are three classes of QoS parameters, i.e.,
Provisioned, Admitted and Active.
The AdmittedQoSParaSet means that the set is only admitted but
not activated by the BS. On the contrally, the ActiveQoSParaSet
shall be admitted first(not for Provisioned), then the set can be
activated. Therefore, in your context, the situation that
ActiveQoSParaSet is set to zero means this parameter set is only
admitted.
Hope the above is helpful for you!
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 59.115.228.111
1F：→ juin:推毛叔 06/11 01:17