作者iamznon (走1走)
看板WoodworkDIY
标题Re: [工具] 高低牙螺丝特别适合用在那些材质??
时间Fri Jan 20 14:46:15 2017
※ 引述《Sodium (Sodium)》之铭言:
: 这是高低牙自攻螺丝
: http://i.imgur.com/MpBiLFI.png
: 最大特徵是螺丝牙有两种,高与低
: 我查询到的资料是说 可以降低物件被锁裂的风险
: 请问除了这个优点外 还有其他的吗??
: 谢谢前辈先进
引用
http://www.shakeproof.com/products/threaded/hi-lo.html
HI-LO® Fasteners - For Plastic and Other Low Density Materials
Hi-Lo
The HI-LO® fastener is the minimal performance solution for fastening in low
pressure environments
such as plastic, particle board, masonite, and wood. It
’s designed with a double-lead thread where the HI thread is sharper than a
conventional one. More material is trapped in between the threads which helps
to resist pull-out.
This also allows for a lower driving torque.
ADVANTAGES:
Perfect screw for low-stress applications
Reduced cracking in plastic bosses
Smaller sized bosses can be designed to save in material and space
Increased pull-out resistance
AVAILABLE FEATURES:
SEMS - add a washer under the head to span larger holes, protect fragile
surfaces, and distribute load.
The 30º included angle of the high thread displaces less material when it is
driven into plastic or wood and, therefore, requires lower driving torques. A
greater amount of material remains between the high threads, increasing the
stripping torque. Low driving torque and high stripping torque provide
maximum protection against stripping problems.
--
人生
不论拿到好牌或烂牌,
最重要的事——把牌打出好结果。
--
※ 发信站: 批踢踢实业坊(ptt.cc), 来自: 223.139.39.178
※ 文章网址: https://webptt.com/cn.aspx?n=bbs/WoodworkDIY/M.1484894787.A.EE8.html
推 b9111111111b: thank you 01/20 21:20
1F:推 kidd0932: 一般螺丝行都定的到 02/15 17:46