※ 引述《RandyMarsh (屎蛋爸)》之铭言： : 最近刚换了SSD(M5S 1.05) : 一直有习惯用DISKEEPER自动重组(2010版) : 换了SSD第一件是就是去确认~DISKEEPER有没有侦测到他是SSD : 结果有侦测到，没有启动自动重组及碎片预防 : 但想请问的是针对SSD优化的HYPERFAST 他有自动启动 : 我现在是先把他关掉了 : 请问这个开着有甚麽实益或助益吗? : 有建议其实开启比较好吗? : 我目前关掉的想法是基於 : M5S 最新韧体1.05 应该会比2010年的DISKEEPER针对SSD效能优化有更进步的技术吧? : 不知道这个想法有没有错误? : 谢谢 昨天换了2012年版 发现跟2010年不一样~ 侦测到SSD後，没有像10一样自动关闭IntelliWrite跟自动重组，也没有HYPERFAST的开关 觉得很奇怪，网路上相关讨论也很少， 所以就用超破的英文谢信去问官方(对方看得懂超开心^^)，回信也超快(4小时内) 主要是问，2012有侦测到SSD却没有自动关闭上述两个功能，需要手动关闭吗? (故意跟他提SSD应该不需要重组吧) 及进阶设定里面的TRIM功能我预设是关闭的，需要手动开启吗? 得到回覆整理如下， 1.开启IntelliWrite跟自动重组 较佳 (个人认为是针对2012版，2010自动重组一定不能开 IntelliWrite既然预设不开觉得应该不要开比较好， 毕竟2012似乎是IntelliWrite 2.0 2010是1.0) (对SSD不会用传统方式重组，应该是於2012开自动重组等於开启HYPERFAST吧我猜) 2.有TRIM就不用开DISKEEPER的TRIM 以下官方原文: ================================================================ Hello, Below are the recommended settings for Diskeeper 12 and SSD drives. Make sure that the Diskeeper sees the drive is an SSD. Then make sure that Automatic Defragmentation is set to run for your C drive. HyperFast will use the Automatic Defragmentation mechanism to run its jobs. It will not do standard defragmentation on the SSD. I would set IntelliWrite to run on the drive as well. This will simply cause the initial write to the drive to be in one piece if at all possible. If you do not have a TRIM utility for the SSD already running, set the TRIM function in Diskeeper to run. If you already have a TRIM function for the drive, do not set the Diskeeper TRIM function to run. Please note that on an SSD, file fragmentation itself is not the issue. It is excessive free space fragmentation. Also, it should be noted that with Diskeeper 12, HyperFast was made less aggressive in order to extend SSD lifespan. However, not all of the reports were properly scaled back. This means that you could get a warning (yellow exclamation point) showing. This is not anything to be concerned about. An adjustment to this reporting is expected in a future update. A critical warning would be of more importance. If you get this let us know. Thanks, Jeff =========================================================== 顺便有问题如下，我应该没有另外装TRIM的软体 DISKEEPER要我确认我的TRIM功能有没有作用 请问要怎麽确认阿? 爬了很多文，都是满旧的文章(似乎都是WIN 7 SP1以前的) 是因为後来WIN7 SP1有修正所以没有这个问题了吗? 还有爬到有人说DisableDeleteNotify = 0 也不一定准确 所以有这个疑问 有简单的测试方法吗? 感谢 --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 1.162.42.28 ※ 编辑: RandyMarsh 来自: 1.162.42.28 (10/22 08:38)