作业系统是XP。 开机执行spfdisk，若发现要修改的动态磁碟系统ID是42。 (42.动态磁碟)把42改回07即可。 日前因为这样抓回一颗1TB的资料。 能印证一次网路上看来的作法，也把这个经验分享给大家。 另外一招是用2000&XP&2003光碟内的Dskprobe.exe 查询/动态硬碟最早那篇m文就是解决方法。 -----------------------以下是网路搜寻他板文章之翻译---------------------- 作者: jackoptt (燎原火) 看板: share 标题: [资讯] 动态硬碟转换成基本硬碟 (中译) 时间: Thu Feb 9 14:21:43 2006 ※ 引述《jackoptt (燎原火)》之铭言： : Convert from Dynamic Disk to Basic Disk without data loss : Windows 2k and above introduce new kind of disk: Dynamic disk. Dynamic Disks : provice features that basic disks do not such as ability to create volumes : that span multiple disk and ability to create fault tolerant volumes. All : volume in dynamic disks are known as dynamic volumes. : We can convert from basic disk to dynamic disk very easily by using Disk : Management tool. But that tool did not allow convert from dynamic disk to : basic disk without data loss. : One day, I had a serious problem: after re-installed Windows 2003 Server, a : dynamic disk could not be recognized. Fortunately, I found in Internet an : article about this problem: : 1) Install dskprobe.exe on the system. (This is one of the utilities in the : Windows 2000 support tools on the install CD, and can be installed by simply : copying the .exe file to the hard drive.) : 2) Run dskprobe.exe on the system. : 3) Select the Drives menu and "Physical Drive. . ." : 4) Double click on the drive that you want to convert back to a basic disk. : Click the "Set Active" button next to that drive. : 5) From the Sectors menu, select "Read" : 6) Accept the defaults (begin sector 0, read 1 sector) and click "Read" : 7) In the editor, go to the "01C0" line and the third bit should be a "42". : Change that to a "07". **Note, a few machines have had this on the "01D0" : line instead. I don't know what that means, so I wouldn't try it unless it is : on a pure test box. (this line will be 01D0 if your disk has multiple : partitions and so on). : 8) From the Sectors menu, select "Write". Confirm all dialog boxes. **Note: : This is the step that will hose your box if you have not followed the above : instructions correctly.** : 9) Exit dskprobe.exe. Reboot : 10) Run chkdsk on the affected logical drive(s). If any errors are found, do : a chkdsk /f to fix them. Done. : Source from: http://faq.arstechnica.com/link.php?i=1806 在资料无损失的状况下将动态磁碟转换成基本磁碟 在Windows 2000及更新的作业系统引进了一种新的技术: 动态磁碟. 动态磁碟提供了许多基本磁碟所不具有的功能,如"跨距磁碟区"和具有"容错"功能 的磁碟区. 而动态磁碟上的磁碟区都为视为动态磁碟区. 我们能轻易的使用"磁碟管理工具"将基本磁碟转换成为动态态磁碟, 但它不能在资料无损失的状况下将动态磁碟转换成基本磁碟. 有一天,一个严重的事情发生了: 在重新安装Windows 2003之後,系统并不能办识 原先的动态磁碟. 幸运地, 我在网路上发现一个解决的方案. 1) 安装 dskprobe.exe 到系统上 (在Windows 2000的光碟上可以找到这个工具, 并具将它复制到硬碟上即可.) 下载点: http://0rz.net/3c12v 2) 执行 dskprobe.exe 3) 点选选单 Drives - Physical Drive... 4) 点两下你想要转换成基本磁碟的磁碟机. 并点选其右边的"Set Active". 5) 点选选单 Sectors - Read. 6) 接受预设选项(Sector0至Sector1), 并点选"Read" 7) 在编辑器中, 至"01C0"行之笫三个位元应为"42", 将其改为"07" **附注:在某些电脑上,它出现在"01D0"行. 目前尚不知为何会如此, 所以 我只在单纯的电脑上测试它"***** 8) 点选选单 Sectors - Write, 确认所有的提示视窗 **附注:如果未完全的执行以上的步骤, 将有可能伤害你的电脑***** 9) 离开dskprobe.exe, 并重新开机. 10)对转换的磁碟执行chkdsk, 若发现任何错误,执行 chkdsk /f 来修复它. 大功告成. 翻的不好, 大家参考看看吧. -- CPU:Q9550 VGA:MSI GTX295 MB :ASUS P5Q Premium MON:HANNspree HF287Hx2 RAM:A-DATA DDR2 2G*4 KB :Enermax KB007U-B HDD:WD640G+FALS*4 MU :Razer salmosa CASE:冰山战神旗舰4G 预定完成的机器.. PSU:CM 1000W gold --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 210.66.227.85