※ 引述《jackoptt (燎原火)》之铭言： : 昨天新买的WD 200G硬碟 : 在电脑A建立动态硬碟 并建立简单磁碟区 : 然後刚开始一切都正常 200GB都有抓到 : 也丢了一大堆资料进去 後来把硬碟拔到另一台电脑B : 也都正常 : 但是要拔回原来的电脑A时 却连线不上了 接电脑B也连线不上 (BIOS都有读到) : 磁碟管理 "连线"是灰色的 也无法"重新启动" 会出现错误讯息 : 我查阅了Log: : 事件类型: 错误 : 事件来源: LDM : 事件类别目录: 无 : 事件识别码: 2 : 日期: 2006/2/9 : 时间: 上午 12:09:41 : 使用者: N/A : 描述: : 内部错误 - 磁碟群组没有正确的设定档复本 (C10000B6)。请在 : http://go.microsoft.com/fwlink/events.asp 查看说明及支援中心，以取得其他资讯 : 事件类型: 错误 : 事件来源: LDM : 事件类别目录: 无 : 事件识别码: 1500 : 日期: 2006/2/9 : 时间: 上午 12:09:46 : 描述: : Disk group Mychat-b800f91fDg0: Errors in some configuration copies: : Disk Harddisk1, copy 1: Block 0: Invalid magic number in the configuration : copy请在 http://go.microsoft.com/fwlink/events.asp 查看说明及支援中心，以取 : 得其他资讯。 : 只剩下"转换成基本硬碟"可以选 但是原来的资料会消失 : 请问有没有办法可以让他再次连线上 或是不遗失资料下转成基本硬碟? : PS:已排除排线问题 换了三条排线 都是这样 我自己找到的 希望有用 HOWTO: Convert a dynamic disk back to a basic disk without data loss Posted By: o2 **Disclaimer: This ONLY works if you have NOT used ANY of the "new" features of dynamic disks such as extending a partition or software RAID. This is an expert-level procedure, so if you don't know what you are doing, you shouldn't be attempting this.** 1) Install dskprobe.exe on the system. (This is one of the utilities in the Windows 2000 support tools on the install CD, and can be installed by simply copying the .exe file to the hard drive.) 2) Run dskprobe.exe on the system. 3) Select the Drives menu and "Physical Drive. . ." 4) Double click on the drive that you want to convert back to a basic disk. Click the "Set Active" button next to that drive. 5) From the Sectors menu, select "Read" 6) Accept the defaults (begin sector 0, read 1 sector) and click "Read" 7) In the editor, go to the "01C0" line and the third bit should be a "42". Change that to a "07". **Note, a few machines have had this on the "01D0" line instead. I don't know what that means, so I wouldn't try it unless it is on a pure test box. ***** 8) From the Sectors menu, select "Write". Confirm all dialog boxes. **Note: This is the step that will hose your box if you have not followed the above instructions correctly.** 9) Exit dskprobe.exe. Reboot 10) Run chkdsk on the affected logical drive(s). If any errors are found, do a chkdsk /f to fix them. Done. ***** svdsinner writes: I did some research, and this relates to having multiple partitions on the drive. I assume partition 1 would be at "01C0", Partition 2 would be at "01D0", Partition 3 would be "01E0", and Partition 4 would be "01F0". I would assume that you would be required to change every partion on the drive back for this to work. However, I have not tested this. Do so at your own risk. Special thanks go to svdsinner! --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 61.30.128.74