作者HiJimmy (嗨 吉米)
看板Network
标题Re: [问答] Pfsense vlan 设定 Hinet MOD
时间Tue Dec 4 22:48:03 2018
我解决了 特来回报
非常的简单，原本还想说要用IGMP PROXY
结果是之前的设定，加上两个要打勾勾的地方
替代掉TPLINK C7 终於能够300M了
不然，对外都只能200M，OPENWRT PPPOE NAT效率不好
硬体线路
IG-040GW(LAN)
|
(WAN)PFSENSE (LAN{Trunk Port})
|
(WAN{Trunk Port})OPENWRT 1F(LAN1)
|
MOD
VLAN设定
PFSENSE
WAN em0-PPPOE
LAN em1.1 VLAN1
MOD_LAN em1.100 VLAN100
MOD_WAN em0
要绑定的两PORT
Bridge MOD_WAN MOD_LAN
VLAN1 VLAN100
WAN tagged tagged
LAN1 off untagged
LAN2 untagged off
LAN3 untagged off
LAN4 untagged off
重点来了
Pfsense=>firewall=>rule 设定
MOD_LAN
我是直接全开
Protocol Source Port Destination Port Gateway Queue
IPv4 * * * * * * none
然後，下列这一项在进阶选项内 一定要打勾
(Allow IP options)
Allow packets with IP options to pass. Otherwise they are blocked by default.
This is usually only seen with multicast traffic.
MOD_WAN 一样的设定
以上
※ 文章网址: https://webptt.com/cn.aspx?n=bbs/Network/M.1543934885.A.1AB.html
※ 编辑: HiJimmy (1.165.28.231), 12/04/2018 22:55:01