TSMC tips litho roadmap, backs maskless Mark LaPedus (02/27/2009 11:45 H EST) SAN JOSE, Calif. -- At the SPIE Advanced Lithography conference here, Taiwan Semiconductor Manufacturing Co. Ltd. (TSMC) disclosed its lithography roadmap and said it is still backing maskless technology. Silicon foundry giant TSMC (Hsinchu) is ramping up its 40-nm logic process, with plans to ship its new and previously-announced 28-nm technology in 2010. Both the 40- and 28-nm processes will use 193-nm immersion lithography, said Burn Lin, senior director of the micropatterning division at TSMC. The real question at TSMC is the 22-nm node and beyond. For 22-nm, the company is evaluating double-patterning, EUV and maskless. IBM Corp. and others are pushing computational lithography for 22-nm, but Lin calls that scheme a resolution enhancement technique (RET)--and not a next-generation lithography (NGL) technology. Considered the innovator behind immersion, Lin said that 193-nm ''wet'' technology can be extended to the 15-nm node (22-nm half-pitch logic), thanks in part to double patterning. Like many chip makers, TSMC may have to resort to double patterning; the so-called NGL technologies are not ready. The trouble with double patterning is that it is ''too expensive,'' Lin said. If the other NGLs are late--and there is no choice in the matter--Lin said he preferred a double-patterning scheme called litho-litho-etch (LLE), ''because of cost.'' In doubling patterning, an IC maker is essentially doubling the process steps, thereby boosting production costs. LLE may be cheaper than the rival litho-etch-litho-etch (LELE) method, but LLE uses newfangled processes that are somewhat unproven. LLE uses two lithography exposures and two resist layers to create smaller IC features. In comparison, LELE uses two lithography exposures and hard-mask etches to create smaller features. A third method is called spacer or self-aligned double patterning. ''Spacer is a double patterning technique that uses deposition, anisotropic (directional) etching and trimming to produce smaller features on chips,'' according to ASML Holding NV. Beyond doubling-patterning, there are a range of choices. Some are pushing extreme ultraviolet (EUV), which uses 13.5-nm wavelength technology. As reported, EUV lithography has been dogged by delays due to the lack of sources, resists and masks. EUV is now being targeted for the 16-nm node. EUV is 'too expensive,'' he said. The prices for EUV ''are difficult to pin down.'' TSMC has yet to order an EUV tool. The company's main tool supplier--ASML Holding NV--is currently selling a ''pre-production'' EUV tool, which will ship next year. EUV tool costs are estimated to be about $90 million. Like EUV, Lin is not a big fan of nano-imprint lithography. There are some defect concerns about 1x masks and the templete process in IC production, he said. As in previous years, Lin said his ''preferred'' NGL is maskless technology, which eliminates the photomask in the IC flow. At 22-nm, TSMC would like to put maskless in mass production--in all of its fabs. The foundry giant itself has invested in Mapper Lithography NV, a developer of maskless tools. Mapper is slated to deliver a ''pre-alpha'' tool to TSMC by the second half of the year, Lin said, adding that he is also watching the other maskless players, such as IMS, KLA-Tencor, TEL/Multibeam and others. The goal for maskless is to have a machine that sells for $5 million euros ($6.3 million) and produces 10 wafers an hour, he said. Maskless is a lower-cost technology, but it has been under-funded and is not mature. It's unclear if maskless will pan out, as the clock is ticking on the technology. Vendors have been working on maskless for years. 2009 or 2010 ''will be very critical for multi-beam e-beam'' technology, he added. At SPIE, Advantest, IMS, KLA-Tencor, Mapper and Multibeam presented papers on maskless or direct-write e-beam. KLA-Tencor Corp. disclosed its maskless technology. Tokyo Electron Ltd. (TEL) plans to sell a maskless tool based on Multbeam's technology. Meanwhile, the eBeam Initiative, a multi-company effort dedicated to the advancement of e-beam direct-write technology for semiconductor prototyping and low-volume manufacturing, launched at the SPIE Advanced Lithography conference. The effort initially 20 companies from across the chip spectrum, including EDA vendors, ASIC suppliers, makers of e-beam tools, photomask suppliers and others. The group is lead by Direct2Silicon Inc. (D2S) and guided by a formal steering committee that includes Advantest, CEA/Leti, e-Shuttle, Fujitsu Microelectronics and Vistec. Meanwhile, TSMC's vendor, Mapper, is also on the move. Late last year, Mapper Lithography and CEA-Leti signed an agreement under which Mapper will ship its 300-mm electron-beam lithography platform to CEA-Leti in Grenoble. The machine will be used for the so-called Imagine program. That effort will cover a range of topics, including tool assessment, patterning and process integration, data handling and cost of ownership studies. In that program, IC companies will assess Mapper's technology for maskless lithography in IC manufacturing. CEA-Leti and Mapper are currently in the process of selecting semiconductor companies to join the program. In R&D for several years, Mapper's e-beam maskless lithography tool is said to use over 10,000 electron beams working in parallel to directly write circuit patterns on a wafer, eliminating the need for the costly photomasks used in current lithography machines. Also in 2008, a new European program was hatched that will push the insertion of maskless lithography for IC manufacturing at the 32-nm ''half-pitch'' node in 2009. The program is called Magic--or Maskless Lithography for IC manufacturing. The group consists of two developers of maskless lithography tools: Mapper Lithography of the Netherlands and IMS Nanofabrication AG of Austria. Magic also consists of STMicroelectronics, CEA-Leti, Synopsys, Qimonda, KLA-Tencor, Fraunhofer and others. http://www.eetimes.com/news/semi/showArticle.jhtml?articleID=215400024 --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 140.112.48.60