各位板大大家好: 近来时小弟遇到一个问题想跟大家请教 PRO/M解算器(solver)的记忆体分配问题，如何分配.... 在跑PRO/M时有一个问题....问题如下.. Run Settings Memory allocation for block solver: 128.0 Memory allocation for element matrices: 2.0 部份省略... The design study terminated abnormally. An error has occurred while requesting an additional 266.832 megabytes of memory from the operating system. To correct this problem, you may need to increase the amount of swap space on your system. You may also need to increase the memory usage limits that are set for your system. For large problems you can also try decreasing the solram allocation setting. At least 1.92205 gigabytes of memory are needed to run this design study. Documentation for this issue can be found in the Technical Support Knowledge base at: http://www.ptc.com/cs/tpi/128412.htm For more information, you can search for the term "swap space" in the Help Center. To access the Help Center Pro/MECHANICA topics, select #Help>#Help Center, set the functional area to "Simulation" and then click on the "Structure and Thermal Online Help" link. 想请问教这是否是记忆体分配不够，如果是又如何把解算器的记忆体加大.... 感谢各位大大.... --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 163.23.218.133 ※ SWELLISH:转录至看板 Cad_Cae 11/12 23:16 ※ 编辑: SWELLISH 来自: 163.23.218.133 (11/12 23:50)