作者lulala453 (我的新人生)
看板LinuxDev
标题[问题] 关於 XDS100v2 与 openocd
时间Fri Dec 16 22:42:29 2011
Hi all,
请问有人有使用过 国内德x 他们卖的
http://goo.gl/WxMzD
XDS100v2 去连接 TI pandaboard 成功过的例子呢 ?
我的执行方式是
sudo openocd -f tcl/interface/xds100v2.cfg -f tcl/board/ti_pandaboard.cfg
xds100v2.cfg 的内容:
1 #
2 # xds100v2
3 #
4
5 interface ft2232
6
#ft2232_device_desc "Texas Instruments Inc.XDS100 Ver 2.0"
7 ft2232_layout xds100v2
8
#ft2232_vid_pid 0x0403 0xa6d0
9 ft2232_vid_pid 0x0403 0x6010
10 reset_config none
把第 8 行改掉是因为用 lsusb 看确实是 0x6010
执行结果是 :
Open On-Chip Debugger 0.5.0 (2011-12-14-00:05)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
none separate
RCLK - adaptive
Using dbgbase = 0x80000000
force hard breakpoints
trst_only separate trst_push_pull
Info : max TCK change to: 30000 kHz
Info : RCLK (adaptive clock speed)
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: omap4430.jrc: IR capture error; saw 0x3f not 0x01
Warn : Bypassing JTAG setup events due to errors
工作环境是 ubuntu 10.10
先谢过啦
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 114.36.221.41
※ 编辑: lulala453 来自: 114.36.221.41 (12/17 00:01)
※ 编辑: lulala453 来自: 114.36.221.41 (12/17 00:18)