作者idiotmax (DucK-QuacK)
看板FreeBSD
标题Re: 是不是新出的都不支援啊？
时间Mon Aug 25 05:12:45 2008
补充一下前一篇
若已经升级到 7stable的话 pciconf -lv 会看到下面这个
age0@pci0:2:0:0: class=0x020000 card=0x82261043 chip=0x10481969 rev=0xb0 hdr=0x00
vendor = 'Attansic (Now owned by Atheros)'
device = 'L1 Gigabit Ethernet 10/100/1000Base-T Ethernet Controller'
class = network
subclass = ethernet
而用 man age 来查也已经可以查得到了，以下节录
AGE(4) FreeBSD Kernel Interfaces Manual AGE(4)
NAME
age -- Attansic/Atheros L1 Gigabit Ethernet driver
...
DESCRIPTION
The age device driver provides support for Attansic/Atheros L1 PCI
Express Gigabit Ethernet controllers.
...
The L1 also supports Jumbo Frames (up to 10240 bytes), which can be con-
figured via the interface MTU setting. Selecting an MTU larger than 1500
bytes with the ifconfig(8) utility configures the adapter to receive and
transmit Jumbo Frames.
...
HARDWARE
The age driver provides support for LOMs based on Attansic/Atheros L1
Gigabit Ethernet controller chips, including:
o ASUS M2N8-VMX
o ASUS M2V
o ASUS M3A
o ASUS P2-M2A590G
o ASUS P5B-E
o ASUS P5B-MX/WIFI-AP
o ASUS P5B-VMSE
o ASUS P5K
o ASUS P5KC
o ASUS P5KPL-VM
o ASUS P5K-SE
o ASUS P5K-V
o ASUS P5L-MX
o ASUS P5DL2-VM
o ASUS P5L-VM 1394
o ASUS G2S
...
HISTORY
The age driver was written by Pyun YongHyeon <
[email protected]>. It
first appeared in FreeBSD 7.1.
※ 引述《[email protected] (七仔)》之铭言：
: ※ 引述《[email protected] (My life is full of chia)》之铭言：
: > 为什麽不附上 source code 来源或者是说一下是哪张板子呢？
: > 不然你这问题应该没人能回答...
: 就这张啦
: asus出的P5KPL-CM
: http://www.asus.com/products.aspx?modelmenu=2&model=2068&l1=3&l2=11&l3=563&l4=0
: Linux的驱动程式原始码
: http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P5KPL-CM
: 可以让它在FreeBSD下驱动吗
:
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 122.116.171.54