看板FreeBSD
标 题PPPoE的顺序？
发信站台大电机 Maxwell BBS (Sun Nov 7 04:02:10 2004)
转信站ptt!ctu-reader!ctu-peer!Spring!news.nctu!news.ntu!bbs.ee.ntu!Maxwell
作者: tabris (Tabris) 看板: BSD
标题: PPPoE的顺序？
时间: Sun Nov 7 03:17:27 2004
小弟各有一台FreeBSD和WinXP
两台共接在一个switch HUB上
然後再接到ATU-R
两台机器都有设定PPPoE
如果FreeBSD先拨号的话，WinXP就会无法拨号
除非把BSD那台的线先拔掉，等XP拨好完再接上才能够两台同时拨号
小弟自己家和两位接法和我一样的朋友都有这样的问题
请问这个该如何解决呢？
/etc/rc.conf
kern_securelevel_enable="NO"
linux_enable="YES"
moused_enable="YES"
nfs_reserved_port_only="YES"
sendmail_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
ifconfig_vr0="inet 192.168.0.132 netmask 255.255.255.0"
defaultrouter="192.168.0.1"
inetd_enable="NO"
hostname="xuanfreebsd.no-ip.org"
ppp_enable="YES"
ppp_mode="ddial"
ppp_net="YES"
ppp_profile="Hinet"
ppp_user="root"
pppoed_enable="YES"
pppoed_interface="vr0"
===============================================================
/etc/ppp/ppp.conf:
default:
#set log Phase Chat LCP IPCP CCP tun command
#ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#set device /dev/cuaa1
#set speed 115200
#set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
#set timeout 180 # 3 minute idle timer (the default)
disable lqr
deny lqr
enable dns # request DNS info (for resolv.conf)
Hinet:
set device PPPoE:vr0
set mtu 1492
set mtu 1492
set authname
[email protected]
set authkey 08000236
set speed sync
set dial
set login
set ifaddr 10.0.0.1/0 10.0.0.2/0
add default HISADDR
nat enable yes
log Phase Chat LCP IPCP CCP tun command
--
※ Origin: 台大电机 Maxwell 站 ◆ From: 61-217-224-215.dynamic.hinet.net
--
※ Origin: 台大电机 Maxwell 站 ◆ From: 61-217-224-215.dynamic.hinet.net