【 在 chiahung. 的大作中提到: 】 : 想用 mpd 来架设 vpn server : 但一直出现下面的错误讯息 : Jun 8 13:34:50 derek mpd: mpd: caught fatal signal term : Jun 8 13:34:50 derek mpd: [client2] IPCP: Down event : Jun 8 13:34:50 derek mpd: [client2] IFACE: Close event : Jun 8 13:34:52 derek mpd: mpd: process 14134 terminated : Jun 8 13:34:54 derek mpd: mpd: pid 14141, version 3.18 ([email protected] 03:12 5-Jun-2004) : Jun 8 13:34:54 derek mpd: [client2] ppp node is "mpd14141-client" : Jun 8 13:34:54 derek mpd: mpd: bind: Can't assign requested address : Jun 8 13:34:54 derek mpd: mpd: can't get PPTP listening socket : Jun 8 13:34:54 derek mpd: mpd: bind: Can't assign requested address : Jun 8 13:34:54 derek mpd: mpd: can't get PPTP listening socket : Jun 8 13:34:54 derek mpd: [client2] using interface ng1 : 下面是我的 mpd 的相关设定档 : : mpd.conf : default: : load pptp : pptp: : load client2 : client2: : new -i ng1 client2 client2 : set ipcp ranges 192.168.7.1/32 192.168.7.12/32 : load client_standard : client_standard: : set iface disable on-demand : set iface enable proxy-arp : set iface idle 1800 : set iface enable tcpmssfix : set bundle disable multilink : set bundle enable compression : set link yes acfcomp protocomp : set link no pap chap : set link enable chap : set link mtu 1400 : set link keep-alive 10 60 : set ipcp yes vjcomp : : mpd.links : client2: : set link type pptp : set pptp self my windows public ip : set pptp enable incoming : set pptp disable originate : 请问是那里设定出了问题呢? : 谢谢 看不出来你的设定,我用我的设定给你参考吧~ default: load pptp pptp: load pptp1 load pptp2 load pptp3 /* 我设了两千多个 举例三个给你看*/ pptp1: new -i ng0 pptp1 pptp1 set ipcp ranges 192.168.4.4/32 192.168.3.4/32 load pptp_def pptp2: new -i ng1 pptp2 pptp2 set ipcp ranges 192.168.4.5/32 192.168.3.5/32 load pptp_def pptp3: new -i ng2 pptp3 pptp3 set ipcp ranges 192.168.4.6/32 192.168.3.6/32 load pptp_def pptp_def: set iface disable on-demand set bundle enable radius-auth radius-fallback set iface enable proxy-arp set iface idle 1800 set bundle enable multilink set link yes acfcomp protocomp set link no pap chap set link enable chap set link keep-alive 10 75 set link mtu 1460 set ipcp yes vjcomp set ipcp dns 192.168.2.254 set ipcp nbns 192.168.2.254 /* 以上是 mpd.conf */ pptp1: set link type pptp set pptp self 218.32.192.53 set pptp enable incoming set pptp disable originate pptp2: set link type pptp set pptp self 218.32.192.53 set pptp enable incoming set pptp disable originate pptp3: set link type pptp set pptp self 218.32.192.53 set pptp enable incoming set pptp disable originate /* 这是 mpd.links */ 00001 00001 00002 00002 00003 00003 /* 这是 mpd.secret */ MPD VPN 真的粉好玩,我用 Hinet ADSL 再拨到 VPN server 出去~ 拨到 VPN 後,又再拨一次....拨了四次 @>@ 右下角一堆网址图示~~ 还可以上网,玩天堂....ㄏㄏㄏ...真无聊的举动~~~ -- ※来源 : 台北科大计中红楼资讯站 redbbs.cc.ntut.edu.tw ※FROM : 218.32.192.18