作者kk123 (阿熊)
看板Electronics
标题Re: [问题] 65nm制程, 200mA电流输出的LDO
时间Mon Apr 30 22:23:05 2012
啊...我现在卡关了 囧
现在在作的这颗 LDO 有个奇特的功能...
当 EN(致能脚) = 1 时,Normal operation, Iout,max = 200mA (这个已经作出来了)
当 EN = 0 时,进入 Standby mode.
此时 Max. ground current = 20uA, Iout,max = 5mA
(啊都进入 Standby mdoe 了,output 干嘛还要可以 driving current 囧...)
请问这代表我要再作一颗小一点的 LDO 在里面吗?
ps. 我刚 google 到有颗 LDO IP 跟我现在设计蛮像的:
http://ace-ic.com/capless%20LDO.html
差别在他定义为 low power mode 我是 standby mode
他是 cap. free 我是 vout 外挂 0.1uF 电容
他Iout,max=100mA(high-power mode) 我是 Iout,max=200mA(normal operation)
※ 引述《kk123 (阿熊)》之铭言:
: 最近本人所在的部门很幸运的接了某客户妥托设计一颗 65nm, 200mA电流输出的LDO (IP)
: 但.... 我以前只有在 0.6um 下作过 300mA 的 LDO (IC),有tape-out验证过会动。
: 因为我们部门之前没有人下过 65nm 的...
: 所以想问问看板上的高手,
: 从 0.6um porting 到 65nm 的话,有什麽项目要特别注意的吗?
--
Joey: But it is odd how a women's purse looks good on me, a man.
Rachel: Exactly! Unisex!
Joey: Maybe you need sex. I had sex a couple days ago.
Rachel: No! No, Joey! U-N-I-sex.
Joey: Well, I ain't gonna say no to that.
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 220.132.98.121