作者a6523139 (白目周)
看板Electronics
标题[问题] OrCAD layout问题
时间Mon Aug 10 19:13:05 2009
小弟要洗一个buck synchronous circuit电路板，
在layout时出现了这个讯息↓
-------------------------------------------------------------------
ERROR [MNL0019] 'C2.1' is tied to nets 'N02004' and 'N04657'.
ERROR [MNL0023] 1 errors found in file.
ERROR [NET0011] Netlist failed or may be unusable
-------------------------------------------------------------------
ERROR [MNL0019] 'C2.1' is tied to nets 'N02004' and 'N04657'.
这讯息告诉我哪边错了，可是我有看没有懂...
於是我查了一下说明
----------------------------------------------------------------------------
[MNL0019] '%s.%s' is tied to nets '%s' and '%s'
This error message appears when there is a conflict between an existing part
reference value for a net with another net. To solve this error, make sure
that the part reference value for a net is unique.
-----------------------------------------------------------------------------
我不懂他所说的：reference value for a net with another net. 是什麽意思？
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 140.117.198.105
1F：→ proach:你把C2整个砍掉重新放一次试试看 08/10 20:07
2F：→ a6523139:我试试看。 08/10 20:43
3F：→ a6523139:感谢大大提醒，我找到问题了。同一个电路图里面同一个元 08/10 22:50
4F：→ a6523139:件不能有相同的代号，比方说：两个电容都是C2，但是容值 08/10 22:51
5F：→ a6523139:不一样，这样就会导致出错ˇˇ 08/10 22:52
6F：→ a6523139:一直照着电路图画，没注意到代号一样... 08/10 22:53