作者finalhaven (俺式最终天堂!!)
站内Electronics
标题[问题]请问Synthesis的问题
时间Sat Apr 19 19:59:00 2008
这是我的VERILOG CODE
=================================================================
module FIFO(
Data_out,
Data_in,
stack_empty,
stack_full,
clk, rst,
write_to_stack,
read_from_stack
);
parameter stack_width = 12;
parameter stack_height = 8;
parameter stack_ptr_width = 3;
output [stack_width -1:0] Data_out;
output stack_empty,stack_full;
input [stack_width -1:0] Data_in;
input clk,rst;
input write_to_stack, read_from_stack;
reg [stack_ptr_width -1:0] read_ptr,write_ptr;
reg [stack_ptr_width:0] ptr_diff;
reg [stack_width-1:0] Data_out;
reg [stack_width-1:0] stack[stack_height-1:0];
assign stack_empty = (ptr_diff == 0)? 1'b1:1'b0;
assign stack_full=(ptr_diff == stack_height)? 1 'b1:1'b0;
always@(posedge clk or posedge rst)
begin:data_transfer
if(rst)Data_out=0;
else if((read_from_stack) && (!write_to_stack) && (!stack_empty))
Data_out <= stack [read_ptr];
(Cannot mix blocking and non blocking assignments on signal <Data_out>.)
不知为何错误的讯息，指在上面Data_out那一行....
else if((write_to_stack)&&(!read_from_stack)&&(!stack_full))
stack [write_ptr] <= Data_in;
end
always@(posedge clk or posedge rst)
begin:update_stack_ptrs
if(rst)
read_ptr <=0;
write_ptr <=0;
ptr_diff <=0;
end
else if((write_to_stack)&&(!stack_full)&&(!read_from_stack))
begin
write_ptr <= write_ptr +1;
ptr_diff<=ptr_diff +1;
end
else if((!write_to_stack)&&(!stack_empty)&&(read_from_stack))
begin
read_ptr <= read_ptr + 1;
ptr_diff <= ptr_diff-1;
end
end
endmodule
=========================================================
此CODE某书里面的CODE
想做STACK忆体练习
我用ISE 9.1i版本去合成
就会跑出上面Data_out那个错误
不知道为甚麽
--
当在跑向终点的漫长旅程上，请不要忘记最初起点的梦想!
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 122.116.21.173
1F：推 espreesso:Cannot mix blocking and non blocking assignments 04/19 20:08
2F：→ espreesso:if(rst)Data_out=0; Data_out <= stack [read_ptr]; 04/19 20:09
3F：→ finalhaven:可是D out是有条件触发捏XD 04/19 20:14
4F：推 espreesso:硬体问题而已..改成if(rst)Data_out<=0;会影响你逻辑吗? 04/19 20:21
5F：→ finalhaven:喔喔～这跟=有什麽差别吗@@" 04/19 20:24
7F：→ finalhaven:感谢m=_=m 04/19 20:29